
1 / 5 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; operating voltage (v) 3.3 to 5; detecting range 0.1-10ppm. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Item Type: Gas Sensor
- Operating Voltage (V): 3.3 to 5
- Detecting Range: 0.1-10ppm
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Gas Sensor |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| Detecting Range | 0.1-10ppm |
| Detection Gas | NO2 |
| Max. Operating Current (A) | 20 |
| Signal Output | Analog Voltage |
| Operating Temperature (°C) | -10~50℃ |
| Operating humidity | 15-90%RH (non-condensing) |
| Life Cycle | ≥5 years (in air) |
| Length (mm) | 13 |
| Width (mm) | 13 |
| Weight (g) | 1 (approx) |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
Overview
The DFRobot Fermion MEMS NO2 Gas Sensor (0.1–10 ppm), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Gas Sensor
- Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Detecting Range: 0.1-10ppm (quoted range is usually line-of-sight; walls and interference shorten it)
- Detection Gas: NO2
- Max. Operating Current (A): 20 (your supply must deliver at least this much current)
- Signal Output: Analog Voltage (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -10~50℃
- Operating humidity: 15-90%RH (non-condensing)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is DFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm). Fermion: MEMS Nitrogen Dioxide NO2 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat generation, short preheating time, and swift response recovery. The sensor can qualitatively measure the concentration of nitrogen dioxide gas, and is suitable for nitrogen dioxide detector, automobile exhaust detection, and other application scenarios.
The MEMS series currently encompasses 11 different types of gas sensors (HCHO, CO, CH4, VOC, NH3, H2S, EtOH, Smoke, Odor, H2, NO2), which can be combined as per specific requirements.
Applications:
- Air quality monitoring: measures the level of NO2 and other pollutants in the ambient air.
- Automotive emission control: monitors the NO2 emission from vehicles and adjusts the fuel injection and combustion parameters to reduce the emission.
- Industrial safety: detects the leakage or exposure of NO2 and other toxic gases in industrial processes or workplaces.
Note: This sensor is capable of only qualitative measurements. For quantitative measurements, kindly consider purchasing the Gravity: Factory Calibrated Electrochemical CO Sensor (0-1000 ppm, I2C & UART).
Precautions for use:
- Kindly remove the protective film before usage.
- To prevent exposure to volatile silicon compounds vapors (such as silicone adhesive, hair gel, silicone rubber, or other locations where volatile silicon compounds are present).
- Avoid exposure to high concentrations of corrosive gases (such as H2S, SOX, Cl2, HCl, etc.).
- Prevent contamination from alkalis, alkali metal salts, and halogens.
- Refrain from prolonged exposure to extreme environments (such as high temperatures, high humidity, high pollution).
- Avoid contact with water, condensation, and freezing.
- Minimize excessive vibration, impact, and dropping.
- Please refrain from employing this module in systems that involve personal safety concerns.
- For extended periods of non-usage, it is advisable to preheat the module for at least 24 hours.
For more info., click below.
- Product wiki
- Schematics & Dimension
- Characteristic Parameter
- Project: Building an Electronic Nose with MEMS Gas Detection Sensor Breakout Series and Edge Impulse Platform
Features:
- Easy to use.
- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current <20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: NO2
- Sensitivity: R0(in air)/Rs(in 5ppm NO2) ≥ 0.5
- Lifespan: ≥5 years (in air)
- Good quality product
Package Includes:
1 x DFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
1 x 2.54mm pitch header pin
Quick specs
- Item Type
- Gas Sensor
- Operating Voltage (V)
- 3.3 to 5
- Detecting Range
- 0.1-10ppm
- Detection Gas
- NO2
- Max. Operating Current (A)
- 20
- Signal Output
- Analog Voltage


















