
1 / 4 · Click to enlarge
AI Summary
A compact MEMS VOC sensor breakout that detects ethanol, formaldehyde and toluene from 1 to 500 ppm with an analog voltage output. It runs on 3.3–5 V and is ideal for indoor air quality and fresh air system projects.
Key Highlights
- MEMS sensor detects ethanol, formaldehyde and toluene
- Measurement range of 1 to 500 ppm
- Analog voltage output for easy microcontroller reading
- Wide 3.3 to 5 V operating voltage
- Compact 13 x 13 mm breakout board
- Low power consumption under 20 mA
Ideal For
- Makers building indoor air quality monitors
- Students learning about gas sensors and MEMS technology
- Developers prototyping air purifier or fresh air system controls
- Electronics hobbyists adding VOC detection to IoT devices
- Educators demonstrating analog sensor interfacing
Buying Tip
Remember that this sensor provides qualitative measurements only; for precise ppm readings, consider a calibrated electrochemical sensor.
Elecvora expert review
Our verdict
The DFRobot Fermion MEMS VOC Gas Sensor is a well-made, compact breakout that makes it easy to add VOC detection to any project. Its analog output and wide voltage range simplify integration, though it is limited to qualitative measurements.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very small and lightweight
- Simple analog interface
- Wide 3.3–5 V compatibility
- Low power consumption
- Long expected life
Cons
- Qualitative measurements only, not calibrated ppm
- Requires soldering or wiring to connect
- Sensitive to silicone vapors and corrosive gases
Best for
Makers and developers needing a simple VOC presence/trend sensor
Not ideal for
Applications requiring precise, calibrated gas concentration readings
Specifications
| Operating Voltage (V) | 3.3 to 5 |
|---|---|
| Detection Gas | ethanol, formaldehyde, toluene |
| Signal Output | Analog Voltage |
| Operating Temperature (°C) | -10~50℃ |
| Operating humidity | 15-90%RH (non-condensing) |
| Life Cycle | ≥5 years (in air) |
| Length (mm) | 13 |
| Width (mm) | 13 |
| Weight (g) | 1 (approx) |
| Shipping Weight | 0.012 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
Frequently Asked Questions
What gases can this sensor detect?
What is the output type?
What voltage does it require?
Is this sensor calibrated for precise ppm readings?
What should I avoid exposing the sensor to?
What is included in the package?
Overview
The DFRobot Fermion MEMS VOC Gas Sensor is a small breakout board built around a microelectromechanical system (MEMS) sensing element. It is designed to detect volatile organic compounds such as ethanol, formaldehyde and toluene at concentrations between 1 and 500 ppm. The sensor provides an analog voltage output that changes with gas concentration, so you can connect it directly to an analog input on most microcontrollers. With an operating voltage of 3.3 to 5 V, it fits neatly into 3.3 V and 5 V logic systems. The board measures just 13 x 13 mm and weighs approximately 1 g, making it easy to embed in compact enclosures or wearable projects. It operates over a temperature range of -10 to 50 °C and a humidity range of 15 to 90% RH (non-condensing), and it has a life cycle of at least 5 years in air.
Key Features
- MEMS technology: tiny sensing element with fast response and low power consumption (under 20 mA).
- Broad detection range: responds to ethanol, formaldehyde and toluene from 1 to 500 ppm.
- Analog output: simple voltage signal that is easy to read with an ADC.
- Flexible power supply: works from 3.3 V to 5 V, compatible with common development boards.
- Compact footprint: 13 x 13 mm board with a lightweight design for space-constrained builds.
- Long service life: rated for at least 5 years in air under normal conditions.
Specifications Explained
Operating voltage (3.3–5 V): The sensor can be powered from either a 3.3 V or 5 V rail, so it suits a wide range of microcontrollers and single-board computers without extra level shifting.
Detection range (1–500 ppm): This range covers typical indoor air quality scenarios, from very low concentrations to noticeable levels of VOCs. It is intended for qualitative measurements, meaning it helps you identify trends and relative changes rather than precise ppm values.
Analog voltage output: The output is a continuous voltage that varies with gas concentration. You can read it with any analog-to-digital converter and apply your own thresholds or calibration curves.
Operating temperature and humidity: The -10 to 50 °C range and 15–90% RH non-condensing limit mean the sensor performs best in typical indoor environments. Avoid condensation and extreme conditions.
Life cycle (≥5 years in air): Under normal storage and operating conditions, the sensing element is expected to remain functional for at least five years.
Compatibility and Requirements
The sensor requires a 3.3 V or 5 V power supply and a device with an analog input to read the output voltage. No specific libraries or drivers are needed. It is a bare breakout board, so you will need to solder or connect wires to the pins. The sensor is not intended for systems that involve personal safety.
Typical Uses
- Indoor air quality monitoring and data logging
- Fresh air system and air purifier control
- Environmental monitoring projects
- Educational demonstrations of gas sensing
- Early fire or smoke detection experiments (qualitative)
What's in the Box
Package contents are not specified by the manufacturer. Please check the product listing for details.
Quick specs
- Operating Voltage (V)
- 3.3 to 5
- Detection Gas
- ethanol, formaldehyde, toluene
- Signal Output
- Analog Voltage
- Operating Temperature (°C)
- -10~50℃
- Operating humidity
- 15-90%RH (non-condensing)
- Life Cycle
- ≥5 years (in air)


















