
1 / 3 · Click to enlarge
AI Summary
A compact DFRobot breakout that connects a microSD (TF) card to your Arduino over SPI. It runs on 5V and gives memory-limited boards a simple way to store data, audio or graphics.
Key Highlights
- MicroSD (TF) card module for Arduino projects
- SPI interface for simple serial data transfer
- 5V power supply suited to Arduino UNO and Mega
- Pinout compatible with DFRobot IO Expansion Shield V7
- Onboard power LED indicator for quick status checks
- Compact breakout design for easy wiring
Ideal For
- Arduino makers building data logging projects
- Students learning SPI and storage basics
- Electronics hobbyists adding removable memory
- Projects storing audio, video or graphics assets
- Users of the DFRobot IO Expansion Shield V7
Buying Tip
Remember that no microSD card is included, so pick up a compatible TF card separately before you start your build.
Elecvora expert review
Our verdict
A tidy, purpose-built breakout that gives Arduino projects removable storage without custom circuitry. The SPI interface and 5V rating keep it easy to integrate with UNO and Mega boards.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple SPI wiring
- 5V rating suits common Arduino boards
- Pinout matches DFRobot IO Expansion Shield V7
- Onboard power LED for quick checks
- Compact breakout layout
Cons
- MicroSD card not included
- Limited to 5V operation as specified
- No card slot protection mentioned
Best for
Arduino makers who need removable storage for logging or media
Not ideal for
Projects running outside the specified 5V SPI setup
Specifications
| Item Type | Module |
|---|---|
| Model No. / Name | MicroSD Card Module |
| Voltage Rating (V) | 5 |
| Interface | SPI |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 9 × 7 × 3 cm |
What's in the box
- 1 x DFRobot Fermion MicroSD Card Module for Arduino (Breakout)
Frequently Asked Questions
What type of card does this module use?
Which boards is it compatible with?
What voltage does the module need?
How does it connect to my board?
Is a microSD card included?
How do I know the module is powered?
Overview
The DFRobot Fermion MicroSD Card Module is a small breakout board that adds removable storage to your microcontroller projects. It accepts a microSD (TF) card, the tiny card format widely used in mobile phones, and communicates with your board over an SPI interface. With a 5V voltage rating, it is built to work alongside common Arduino boards such as the UNO and Mega, and its pinout is fully compatible with DFRobot's IO Expansion Shield V7.
Memory is often the tightest constraint on a small microcontroller. This module gives you a straightforward way to expand what a project can hold, whether you are logging readings over time or storing media files for playback.
Key Features
- MicroSD (TF) card support for a small, widely available card format.
- SPI interface for simple, well-understood serial communication.
- 5V power supply matching common Arduino logic and power setups.
- Onboard power LED so you can see at a glance that the board is powered.
- Convenient breakout design that keeps connections clear and easy to wire.
- Pinout compatibility with DFRobot's IO Expansion Shield V7.
Specifications Explained
Voltage rating: 5V
The module is rated for a 5V supply, which aligns with the operating voltage of Arduino UNO and Mega boards. This means it can share the same supply as your controller in typical builds.
Interface: SPI
SPI is a serial interface that uses a small set of signal lines to exchange data between a microcontroller and a peripheral. For a storage module, this keeps wiring simple and lets the board handle file reads and writes efficiently.
MicroSD (TF) format
MicroSD, also called TF, is the smallest common memory card format. Cards in this format are easy to source and take up very little space on a build.
Compatibility and Requirements
The module is designed for 5V operation and SPI communication, and is described as compatible with Arduino UNO and Mega boards. Its pinout is fully compatible with DFRobot's IO Expansion Shield V7. You will need a microSD (TF) card and a suitable host board to use it; the card is not part of the package.
Typical Uses
- Data logging, such as recording sensor readings over time.
- Storing audio files for playback projects.
- Holding video or graphics assets for display projects.
- Expanding the usable memory of an Arduino build.
What's in the Box
1 x DFRobot Fermion MicroSD Card Module for Arduino (Breakout). A microSD card is not included.
Quick specs
- Item Type
- Module
- Model No. / Name
- MicroSD Card Module
- Voltage Rating (V)
- 5
- Interface
- SPI
- Shipping Weight
- 0.015 kg
- Shipping Dimensions
- 9 × 7 × 3 cm


















