
1 / 4 · Click to enlarge
AI Summary
A compact 3.3 V breakout that measures temperature, humidity, barometric pressure, ambient light and UV through dedicated sensor chips. Its onboard MCU outputs ready-to-use values over I2C or UART.
Key Highlights
- Four sensor chips cover five environmental parameters in one module
- Onboard MCU outputs standard units over I2C or UART
- SHTC3 humidity accuracy of plus or minus 2 percent RH
- BMP280 pressure range from 300 to 1100 hPa
- ML8511 UV sensing across UV-A and UV-B wavelengths
- Small 30 x 20.5 mm board for direct PCB soldering
Ideal For
- Makers building indoor or outdoor environmental monitoring systems
- Students learning I2C and UART sensor integration
- Engineers who need several environmental readings from one board
- Weather station hobbyists logging pressure, temperature and humidity
- PCB designers wanting a small solderable sensor module
Buying Tip
Confirm your host board runs at 3.3 V logic and decide between I2C and UART before soldering, since the wiring and library setup differ.
Elecvora expert review
Our verdict
This breakout is a practical choice when one board needs to report several environmental parameters without a tangle of separate modules. The onboard conversion to standard units and dual I2C or UART output make integration straightforward for Arduino and Python users.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Five environmental parameters from four dedicated sensor chips
- Onboard MCU delivers values in standard units
- Switchable I2C and UART output
- Small 30 x 20.5 mm board suits compact builds
Cons
- Requires a 3.3 V supply and matching logic level
- Bare breakout may need soldering before use
- Package contents are not specified
Best for
Makers and students building compact multi-parameter environmental monitors
Not ideal for
Users wanting a pre-assembled, plug-and-play module with cables included
Specifications
| Voltage Rating | 3.3 |
|---|---|
| Working Current (mA) | 35 |
| Signal Output | I2C, UART |
| Operating Temperature (°C) | -20 to 70°C |
| Size (mm) | 30mm x 20.5mm |
| Shipping Weight | 0.16 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Frequently Asked Questions
What parameters can this sensor measure?
Which output modes are available?
What voltage does it need?
Are libraries provided?
Can I solder it directly to a PCB?
What is included in the package?
Overview
The DFRobot Fermion Multifunctional Environmental Sensor packs four dedicated sensing chips onto a single breakout board measuring 30 mm by 20.5 mm. Instead of wiring separate modules for climate and light data, you get temperature, humidity, barometric pressure, ambient light and UV intensity from one device. The design places the sensing elements carefully and manages heat conduction so readings stay consistent.
An onboard MCU chip processes the raw sensor output and converts it into practical units: degrees Celsius or Fahrenheit for temperature, percent for humidity, kilopascals for pressure, lux for illuminance and milliwatts per square metre for UV. Your host board reads finished values rather than raw registers, which shortens both wiring and code.
Key Features
- SHTC3 temperature and humidity sensor with plus or minus 0.2 degrees Celsius and plus or minus 2 percent RH accuracy
- BMP280 barometric pressure sensor covering 300 to 1100 hPa
- VEML7700 ambient light sensor for illuminance in lux
- ML8511 UV sensor sensitive to UV-A and UV-B wavelengths
- Switchable I2C and UART output modes
- Compact breakout format that can be soldered directly onto a PCB
Specifications Explained
The 3.3 V voltage rating and 35 mA working current mean the board suits common 3.3 V microcontroller platforms. Always confirm your host logic level matches before connecting.
Temperature measurement spans -40 to 125 degrees Celsius on the sensor, with 0.01 degree resolution, while the stated operating temperature for the module is -20 to 70 degrees Celsius. Humidity reads across 0 to 100 percent RH at 0.01 percent resolution. Pressure accuracy is quoted at plus or minus 1 hPa absolute and plus or minus 0.12 hPa relative, which is fine for weather-style tracking and altitude estimation.
Choosing between I2C and UART changes how you wire the board and how your code reads it, so decide early in your build. The small footprint keeps the module out of the way inside enclosures.
Compatibility and Requirements
The sensor works with Arduino and Python libraries supplied for the product, and it supports both I2C and UART hosts. You need a 3.3 V supply and a microcontroller with a free I2C or UART interface. Because it is a bare breakout, plan for soldering or header pins depending on your setup.
Typical Uses
- Indoor and outdoor environment detection systems
- Classroom and laboratory environmental monitoring projects
- Weather stations that log pressure, temperature and humidity
- Light and UV awareness projects for indoor spaces
What's in the Box
Package contents are not specified for this listing. Check the product packaging for the exact included items.
Quick specs
- Voltage Rating
- 3.3
- Working Current (mA)
- 35
- Signal Output
- I2C, UART
- Operating Temperature (°C)
- -20 to 70°C
- Size (mm)
- 30mm x 20.5mm
- Shipping Weight
- 0.16 kg


















