
1 / 4 · Click to enlarge
AI Summary
A compact I2C breakout board carrying the Sensirion SHTC3 digital humidity and temperature sensor. It measures 0-100%RH and -40 to +125°C at 3.3-5V with roughly 0.45mA draw, making it easy to add climate sensing to Arduino and other microcontroller projects.
Key Highlights
- Sensirion SHTC3 digital humidity and temperature sensing element
- Wide 0 to 100%RH humidity range with ±2% typical accuracy
- Temperature measurement from -40 to +125°C (-40 to +275°F)
- I2C interface, works from a 3.3V to 5V supply
- Low operating current around 0.45mA for battery-powered builds
- M2 mounting holes on a 10mm pitch, 14 x 17mm board
Ideal For
- Arduino and microcontroller hobbyists adding climate sensing
- Students building weather station or data logger projects
- Makers monitoring humidity inside enclosures and appliances
- Battery-powered wireless sensor node builders
- Anyone needing a compact I2C humidity and temperature module
Buying Tip
Check that your project has a free I2C bus and a 3.3V or 5V rail before ordering, since the board needs both to operate.
Elecvora expert review
Our verdict
A tidy, low-power humidity and temperature breakout that covers a wide measurement range and works with both 3.3V and 5V systems. It suits makers who want reliable climate data without building sensor circuitry themselves.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 0-100%RH and -40 to +125°C measurement range
- Simple I2C interface with 3.3V to 5V supply flexibility
- Low current draw around 0.45mA for battery projects
- Compact 14 x 17mm board with M2 mounting holes
Cons
- Requires a host microcontroller with an I2C bus
- No enclosure or cable included beyond the 4-pin connector
Best for
Makers and students adding humidity and temperature sensing to Arduino-style projects
Not ideal for
Users wanting a standalone display unit without a microcontroller
Specifications
| Rated Voltage (VDC) | 3.3 to 5 |
|---|---|
| Communication Interface | I2C |
| Operating Current (mA) | 0.45mA |
| Humidity Range | 0~100%RH |
| Measurement Accuracy | Humidity: ±2%, Temperature: '-40~+125℃ (-40~+275℉) |
| Response Time(s) | 8s(tau63%) |
| Dimensions (L x W x H) mm | 14*17mm/0.55*0.67” |
| Mounting Hole Diameter (mm) | M2 (2mm) |
| Mounting Hole PCD (mm) | 10mm |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 6 × 5.5 × 2.5 cm |
What's in the box
- 1 x Fermion SHTC3 Humidity & Temperature Sensor
- 1 x 2.54mm black single-row 4-pin connector
Frequently Asked Questions
What does the SHTC3 sensor measure?
What voltage does the module need?
How do I connect it to a microcontroller?
How accurate are the readings?
What is included with the sensor?
How do I mount the board?
Overview
The DFRobot Fermion SHTC3 is a small sensor board that brings digital humidity and temperature measurement to your microcontroller projects. At its centre sits the Sensirion SHTC3 sensing element, which reports relative humidity across the full 0 to 100%RH span and temperature from -40 to +125°C (-40 to +275°F). Data is exchanged over I2C, the interface most Arduino and maker boards already support, so wiring is limited to power, ground and the two bus lines.
The module accepts 3.3V to 5V, which means it can share a supply with common 5V boards as well as 3.3V logic systems. Current draw is about 0.45mA, low enough that the sensor will not meaningfully shorten the run time of a battery-powered logger or wireless node.
Key Features
- Sensirion SHTC3 digital humidity and temperature sensor
- Humidity range of 0 to 100%RH with ±2% typical accuracy
- Temperature range of -40 to +125°C (-40 to +275°F)
- I2C communication interface
- 3.3V to 5V rated voltage
- Approximately 0.45mA operating current
- Response time of 8s (tau63%)
- 14 x 17mm board with M2 mounting holes on a 10mm pitch
Specifications Explained
Humidity range and accuracy: covering 0 to 100%RH means the sensor can report conditions from very dry air through to full saturation, with typical accuracy of ±2%. That is a practical level of precision for indoor monitoring, weather logging and enclosure checks.
Temperature range: the -40 to +125°C span covers normal indoor and outdoor conditions as well as many equipment and enclosure environments, so the same board works across a wide variety of projects.
I2C interface: a two-wire bus keeps wiring simple and lets the sensor sit alongside other I2C devices on the same microcontroller.
Voltage and current: the 3.3V to 5V input range removes the need for a level shifter on most boards, while the roughly 0.45mA draw is friendly to battery-powered designs.
Response time: an 8s tau63% figure indicates how quickly the sensor tracks a change in conditions, which is useful when deciding how often to sample.
Compatibility and Requirements
The board is designed for I2C-capable microcontrollers and requires a 3.3V to 5V supply. You will need a host board with an I2C bus, plus connecting wires; the included 2.54mm single-row 4-pin connector helps with hook-up. Mounting is handled by the two M2 holes spaced 10mm apart. No additional libraries or software are specified in the product data, so check the manufacturer's documentation for code examples.
Typical Uses
- HVAC and indoor climate monitoring
- Automotive cabin or component environment checks
- Data loggers that record humidity and temperature over time
- Weather stations and outdoor sensor nodes
- Home appliance and enclosure monitoring projects
What's in the Box
- 1 x Fermion SHTC3 Humidity & Temperature Sensor
- 1 x 2.54mm black single-row 4-pin connector

Quick specs
- Rated Voltage (VDC)
- 3.3 to 5
- Communication Interface
- I2C
- Operating Current (mA)
- 0.45mA
- Humidity Range
- 0~100%RH
- Measurement Accuracy
- Humidity: ±2%, Temperature: '-40~+125℃ (-40~+275℉)
- Response Time(s)
- 8s(tau63%)


















