Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact dual DC motor driver breakout based on the TB6612FNG, delivering 1.2A continuous per channel with L298N-style control logic. It runs both motors from just four control pins and fits easily into small robot and breadboard builds.

Key Highlights

  • Dual full-bridge channels drive two DC motors independently
  • 1.2A continuous current per channel for small robotics
  • L298N-style control logic needs only four control pins
  • Logic voltage range of 2.7V to 5.5V suits common microcontrollers
  • Motor power supply range of 2.5V to 12V
  • Compact 20mm x 19.5mm board with XH2.54 headers

Ideal For

  • Makers building small two-wheel robots
  • Students learning motor control with Arduino-style boards
  • Hobbyists prototyping automation projects on a breadboard
  • Designers of compact embedded systems needing dual motor channels
  • Educators preparing introductory robotics lessons

Buying Tip

Check that your motors' normal running current stays at or below 1.2A per channel, and plan a separate motor supply within 2.5V to 12V.

Elecvora expert review

Our verdict

A tidy, compact dual motor driver that keeps wiring simple thanks to L298N-style control logic and a small footprint. It is a sensible choice for low-power robot builds where 1.2A per channel is enough.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Small 20mm x 19.5mm footprint suits tight builds
  • Four-pin control keeps microcontroller I/O free
  • Wide logic range covers 3.3V and 5V boards
  • XH2.54 headers simplify breadboard wiring

Cons

  • Continuous current is limited to 1.2A per channel
  • Motors and controller are not included
  • Motor supply is separate from logic power

Best for

Small two-motor robots and breadboard prototypes

Not ideal for

High-current motors or heavy-duty drive systems

Specifications

Item TypeBreakout Board
Model No. / NameTB6612FNG
Operating Voltage (V)2.7 to 5.5
Motor power supply Range2.5 to 12
Channel2
Continuous Discharge Current (A)1.2
Connector TypeXH2.54
Length (mm)20
Width (mm)19.5
Weight (g)05
Shipping Weight0.007 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • 1 x 2x1.2A DC Motor Driver (TB6612FNG)
  • 2 x XH2.54-6Pin

Frequently Asked Questions

How many motors can this board drive?
It has two channels, so it can drive two DC motors independently.
What current can each channel handle?
Each channel supports up to 1.2A continuous current.
What voltages does it need?
The logic side accepts 2.7V to 5.5V, and the motor supply accepts 2.5V to 12V.
Is it compatible with Arduino-style boards?
Yes. Its control logic is similar to the L298N, which makes it approachable for Arduino-compatible projects.
What connectors does it use?
It uses standard XH2.54 connectors, and two XH2.54-6Pin parts are included.
What is included with the driver?
The package contains one TB6612FNG motor driver board and two XH2.54-6Pin connectors. Motors and a controller are not included.

Overview

The DFRobot Fermion TB6612FNG is a dual-channel DC motor driver breakout board built around the TB6612FNG full-bridge driver IC. It is designed for low-power robotics and DIY automation where space is limited and simple control is important. Two motors can be driven independently, each with up to 1.2A continuous current, while the board itself measures only 20mm by 19.5mm and weighs about 5g.

Because the control logic follows the familiar L298N approach, it is straightforward to use with Arduino-style projects. Only four control pins are needed to drive both motors, which helps preserve I/O on smaller boards.

Key Features

  • Two full-bridge motor channels for independent bidirectional control
  • 1.2A continuous current per channel
  • L298N-compatible control logic for easy adoption
  • Logic supply range of 2.7V to 5.5V
  • Motor power supply range of 2.5V to 12V
  • Standard XH2.54 connectors for breadboard-friendly wiring

Specifications Explained

Channels: Two channels mean you can run a pair of DC motors, the typical setup for a small differential-drive robot.

Current: The 1.2A continuous rating per channel is intended for low-power motors. Choose motors whose normal running current stays within that figure.

Logic voltage: The 2.7V to 5.5V logic range lets the control side work with common 3.3V and 5V microcontroller boards.

Motor supply: The separate 2.5V to 12V motor input powers the motors, so the driver can be matched to the motor voltage in your build.

Size and connectors: At 20mm x 19.5mm with XH2.54 headers, the board suits compact embedded designs and quick breadboard prototyping.

Compatibility and Requirements

The board uses L298N-style control logic, making it approachable for Arduino-compatible projects. It requires a logic supply within 2.7V to 5.5V and a separate motor supply within 2.5V to 12V. Connections use XH2.54 headers, and the included XH2.54-6Pin parts support wiring. Motors and a controller board are not included.

Typical Uses

  • Small wheeled and micro robot projects
  • DIY automation prototypes
  • Breadboard experiments with DC motors
  • Compact embedded designs needing two motor channels
  • Educational and learning builds

What's in the Box

  • 1 x 2x1.2A DC Motor Driver (TB6612FNG)
  • 2 x XH2.54-6Pin

Quick specs

Item Type
Breakout Board
Model No. / Name
TB6612FNG
Operating Voltage (V)
2.7 to 5.5
Motor power supply Range
2.5 to 12
Channel
2
Continuous Discharge Current (A)
1.2
See all specifications