Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny DFRobot ultrasonic breakout that measures 15 cm to 900 cm with 1 cm resolution and 3.3-5.5 V operation. Its I2C, UART Modbus-RTU and HC-SR04-compatible TRIG pulse modes make it easy to add to Arduino or Raspberry Pi projects.

Key Highlights

  • Measures 15 cm to 900 cm for short to mid-range sensing
  • 1 cm resolution with smart noise detection and real-time calibration
  • Three interfaces: I2C, UART Modbus-RTU and TRIG pulse
  • TRIG pulse mode is HC-SR04 compatible for easy upgrades
  • Runs on 3.3 V to 5.5 V for Arduino and Raspberry Pi boards
  • Compact 22 x 20 mm breakout weighing about 5 g

Ideal For

  • Robotics builders adding reliable distance sensing
  • Automation and control engineers measuring levels
  • Arduino and Raspberry Pi makers exploring I2C or UART sensors
  • Students learning ultrasonic ranging techniques
  • Makers upgrading from HC-SR04-style sensors

Buying Tip

Check that your supply can handle the 350 mA instantaneous current and decide which interface your project will use before wiring the 4-pin connector.

Elecvora expert review

Our verdict

The URM13 packs a wide 15-900 cm range and three interface options into a very small breakout, which makes it flexible for robotics and automation work. Its 350 mA peak current and reliance on ultrasonic principles mean it needs a solid supply and sensible mounting.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 15-900 cm range with 1 cm resolution
  • Three interfaces including HC-SR04-compatible pulse mode
  • 3.3 V to 5.5 V operation suits many boards
  • Small 22 x 20 mm footprint at about 5 g
  • Smart noise detection and real-time calibration

Cons

  • Instantaneous current of 350 mA requires a capable supply
  • Ultrasonic sensing is affected by soft or angled surfaces
  • No enclosure or mounting hardware included beyond the connector

Best for

Compact robotics and automation projects needing flexible, mid-range distance sensing

Not ideal for

Applications requiring sub-centimetre precision or sensing closer than 15 cm

Specifications

Item TypeBreakout Board
Model No. / NameURM13
Measurement Range15 cm – 900 cm
Power Supply Voltage (V)3.3 to 5.5
Instantaneous current350 mA
Resolution1 cm
Accuracy± 1°C
Communication InterfaceI2C, TRIG (pulse), UART (Modbus‑RTU)
Operating Temperature (°C)–10  to +70 
Length (mm)22
Width (mm)20
Weight (g)05
Shipping Weight0.009 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • 1 x DFRobot Fermion URM13 High Sensitivity Ultrasonic Distance Sensor
  • 1 x 2.54 mm black single-row 4-pin connector

Frequently Asked Questions

What distance range does the URM13 measure?
It measures from 15 cm to 900 cm with 1 cm resolution.
Which interfaces does it support?
It supports I2C, UART with Modbus-RTU, and a TRIG pulse mode that is compatible with HC-SR04-style signals.
What voltage does it need?
The board accepts 3.3 V to 5.5 V and has a stated instantaneous current of 350 mA.
Can I use it with Arduino and Raspberry Pi?
Yes, it is designed to work with 3.3 V and 5 V systems such as Arduino and Raspberry Pi boards when using a supported interface.
What is included in the package?
You receive one URM13 sensor breakout and one 2.54 mm black single-row 4-pin connector.
What temperature range does it operate in?
It is rated for operation from -10 to +70 degrees Celsius.

Overview

The DFRobot Fermion URM13 is a high-sensitivity ultrasonic distance sensor built onto a small breakout board. It measures distances from 15 cm up to 900 cm with 1 cm resolution, covering short and mid-range sensing tasks in a single module. Unlike simple ultrasonic sensors that offer only a trigger and echo pulse, the URM13 provides three ways to communicate: I2C, UART using Modbus-RTU, and a TRIG pulse mode that is compatible with the common HC-SR04 signal pattern.

The board is designed for stable readings in real environments. Smart noise detection and automatic real-time calibration help it cope with electrical interference and cluttered surroundings. It accepts a supply voltage of 3.3 V to 5.5 V, so it can be used with both 3.3 V and 5 V microcontroller systems. With a footprint of about 22 x 20 mm and a weight of roughly 5 g, it fits neatly into compact builds.

Key Features

  • Wide measurement range: 15 cm to 900 cm for short to mid-range distance sensing.
  • Fine resolution: 1 cm steps help distinguish nearby objects and small changes in level.
  • Three interfaces: I2C, UART with Modbus-RTU, and TRIG pulse output.
  • HC-SR04 compatibility: the TRIG pulse mode allows a straightforward swap in existing projects.
  • Flexible power: operates from 3.3 V to 5.5 V.
  • Compact form factor: 22 x 20 mm board at about 5 g.

Specifications Explained

Range and resolution: the 15 cm minimum distance means the sensor is intended for objects that are not pressed directly against it, while the 900 cm maximum suits room-scale and tank-level measurements. A 1 cm resolution gives useful detail without overstating precision.

Interfaces: I2C is convenient when several devices share a bus and pin count is limited. UART with Modbus-RTU suits longer cable runs and industrial-style polling. TRIG pulse mode is the simplest option and matches HC-SR04-style code, which helps when replacing an existing sensor.

Power: the 3.3 V to 5.5 V supply range covers common logic levels. The stated instantaneous current is 350 mA, so the supply should be able to deliver that peak during a measurement.

Environment: the operating temperature range of -10 to +70 degrees Celsius covers typical indoor and sheltered installations.

Compatibility and Requirements

The URM13 works with 3.3 V and 5 V systems such as Arduino and Raspberry Pi boards, provided the chosen interface is supported in your code. I2C and UART need the corresponding pins and, for Modbus-RTU, correct serial settings. TRIG pulse mode needs a digital trigger pin and a pulse-read input. A stable supply capable of the 350 mA instantaneous current is recommended.

Typical Uses

  • Robot obstacle detection and distance sensing
  • Automation projects that need repeatable distance readings
  • Level measurement in tanks or bins within the 15-900 cm range
  • Educational builds exploring I2C, UART or pulse-based sensing
  • Retrofitting HC-SR04-based projects with a wider-range sensor

What's in the Box

  • 1 x DFRobot Fermion URM13 High Sensitivity Ultrasonic Distance Sensor
  • 1 x 2.54 mm black single-row 4-pin connector

Quick specs

Item Type
Breakout Board
Model No. / Name
URM13
Measurement Range
15 cm – 900 cm
Power Supply Voltage (V)
3.3 to 5.5
Instantaneous current
350 mA
Resolution
1 cm
See all specifications