Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP32-S3 development board with a 240 MHz dual-core LX7 processor, 4MB flash, Wi-Fi and Bluetooth 5.1. Its onboard lithium battery charging and GDI display connector make it a tidy core for small IoT and AIoT builds.

Key Highlights

  • ESP32-S3-WROOM-1-N4 module with AI acceleration support
  • Dual-core 32-bit LX7 processor clocked up to 240 MHz
  • 512KB SRAM and 4MB flash for firmware and data
  • Wi-Fi 2.4 GHz plus Bluetooth 5.1 dual-mode wireless
  • Onboard lithium battery charging and hardware power switch
  • Compact 60 × 25.4 mm board with GDI display interface

Ideal For

  • IoT developers prototyping connected sensor nodes
  • Makers building compact AIoT and edge-computing projects
  • Students learning ESP32-S3 programming with Arduino or MicroPython
  • Designers needing a small board with Li-ion charging and a display port

Buying Tip

Check whether your project needs a camera: this FireBeetle 2 ESP32-S3 version has no camera interface, so plan a different board if imaging is required.

Elecvora expert review

Our verdict

The FireBeetle 2 ESP32-S3 N4 packs a capable dual-core LX7, wireless connectivity and battery charging into a very small board. It is a sensible pick for compact IoT builds, provided you do not need a camera interface.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 240 MHz dual-core LX7 with 512KB SRAM and 4MB flash
  • Wi-Fi plus Bluetooth 5.1 dual mode in one module
  • Onboard Li-ion charging and hardware power switch
  • GDI connector simplifies display attachment
  • Small 60 × 25.4 mm footprint

Cons

  • No camera interface on this version
  • Headers ship loose and need soldering
  • Battery and USB-C cable are not included

Best for

Compact IoT and AIoT projects with wireless and display needs

Not ideal for

Projects that require a camera interface

Specifications

Item TypeMicrocontroller
Model No. / NameIoT Microcontroller
ProcessorXtensa® dual-core 32-bit LX7 microprocessor
Clock Frequency240 MHz
SRAM512KB
ROM Capacity384KB
Flash4MB
USBUSB 2.0 OTG full-speed interface
InterfaceFireBeetle V2 series compatible
Input Voltage (VDC)USB-C interface: 5V DC, PH2.0 interface: 3.7V Li-ion, VCC pin: 5V DC
Length (mm)60
Width (mm)25.4
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions10 × 7 × 3 cm

What's in the box

  • 1 x FireBeetle 2 ESP32-S3 (N4) IoT Microcontroller
  • 1 x 18-pin 2.54mm pitch male header
  • 1 x 18-pin 2.54mm pitch female header
  • 1 x 14-pin 2.54mm pitch male header
  • 1 x 14-pin 2.54mm pitch female header

Frequently Asked Questions

What processor does this board use?
It uses the Espressif ESP32-S3-WROOM-1-N4 module with a dual-core 32-bit LX7 microprocessor running at up to 240 MHz, backed by 512KB SRAM and 4MB flash.
How can I power the board?
You can use the USB-C interface at 5V DC, a 3.7V Li-ion battery through the PH2.0 connector, or 5V DC on the VCC pin. Onboard charging is included for the Li-ion option.
Which programming environments are supported?
The board can be programmed with Arduino IDE, ESP-IDF or MicroPython.
Does it have a camera connector?
No. This FireBeetle 2 ESP32-S3 (N4) version does not come with a camera interface.
What wireless standards does it support?
It supports IEEE 802.11b/g/n Wi-Fi on the 2.4 GHz band and Bluetooth 5.1 dual mode, including Bluetooth mesh.
What is included in the package?
You receive the microcontroller board plus 18-pin and 14-pin 2.54mm pitch male and female headers.

Overview

The DFRobot FireBeetle 2 ESP32-S3 N4 is a small main control board for connected projects. It is built on the Espressif ESP32-S3-WROOM-1-N4 module, which brings a dual-core 32-bit LX7 microprocessor, 512KB SRAM and 4MB flash into a board measuring just 60 × 25.4 mm. Wireless coverage comes from 2.4 GHz Wi-Fi and Bluetooth 5.1 in dual mode, so the board can join a network, act as an access point or talk to nearby Bluetooth devices.

The ESP32-S3 also includes AI acceleration, which makes this board a practical choice for low-computation edge tasks such as simple recognition or sensor signal processing, without adding a separate accelerator.

Key Features

  • Dual-core LX7 at 240 MHz: enough headroom for networking, display output and sensor handling in one sketch.
  • Flexible power: run from USB-C at 5V DC, a 3.7V Li-ion cell through the PH2.0 connector, or 5V DC on the VCC pin.
  • Integrated power management: onboard lithium battery charging plus a hardware power on/off control.
  • GDI display interface: an independent onboard connector for quickly attaching a compatible display.
  • Rich pin set: 26 digital I/O, 2 SPI, 3 UART, 2 I2C, 2 I2S, 8-channel LED PWM, infrared transmit and receive channels, and 2 × 12-bit SAR ADCs with 20 channels.
  • Multiple toolchains: program with Arduino IDE, ESP-IDF or MicroPython.

Specifications Explained

The 240 MHz clock and 512KB SRAM determine how much work the board can do at once; they are comfortable for web-connected sensors, small dashboards and display-driven interfaces. The 4MB flash stores your program and supporting files. USB 2.0 OTG full-speed on USB-C handles programming and serial communication.

Wireless support covers IEEE 802.11b/g/n on the 2.4 GHz band with 20 MHz and 40 MHz bandwidth, in Station, SoftAP, SoftAP+Station and mixed modes. Bluetooth 5.1 dual mode includes Bluetooth mesh, with supported rates of 125 Kbps, 500 Kbps, 1 Mbps and 2 Mbps.

Compatibility and Requirements

The board follows the FireBeetle V2 series interface, so it fits within that ecosystem of boards and accessories. Programming requires a computer with a USB-C connection and one of the supported environments: Arduino IDE, ESP-IDF or MicroPython. Note that this version does not include a camera interface.

Typical Uses

Good fits include IoT sensor nodes, home automation controllers, small AIoT prototypes, portable projects powered by a Li-ion cell, and builds that need a display attached through the GDI connector. The compact size helps where enclosure space is limited.

What's in the Box

  • 1 × FireBeetle 2 ESP32-S3 (N4) IoT Microcontroller
  • 1 × 18-pin 2.54mm pitch male header
  • 1 × 18-pin 2.54mm pitch female header
  • 1 × 14-pin 2.54mm pitch male header
  • 1 × 14-pin 2.54mm pitch female header

Quick specs

Item Type
Microcontroller
Model No. / Name
IoT Microcontroller
Processor
Xtensa® dual-core 32-bit LX7 microprocessor
Clock Frequency
240 MHz
SRAM
512KB
ROM Capacity
384KB
See all specifications