Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: pulse per revolution (ppr) 20; operating voltage (vdc) 3.3 to 5; rotation angle 360°. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Pulse Per Revolution (PPR): 20
  • Operating Voltage (VDC): 3.3 to 5
  • Rotation angle: 360°

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pulse Per Revolution (PPR)20
Operating Voltage (VDC)3.3 to 5
Rotation angle360°
InterfaceTwo Gravity connectors; I2C
Rotation Lifespan30000±200 Cycles
Contact Resistance (ohm)≤100mΩ
Insulation Impedance100MΩ above
Operating Temperature (°C)-30℃~+80℃
Storage Capacity0~1023
Dimensions (L x W x H) mm37*37mm/1.46*1.46”
Shipping Weight0.02 kg
Shipping Dimensions10 × 10 × 2 cm

Overview

The DFRobot Gravity 360° Rotary Encoder Module, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pulse Per Revolution (PPR): 20
  • Operating Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Rotation angle: 360°
  • Interface: Two Gravity connectors; I2C (confirm your cable or board uses the same connector)
  • Rotation Lifespan: 30000±200 Cycles
  • Contact Resistance (ohm): ≤100mΩ
  • Insulation Impedance: 100MΩ above
  • Operating Temperature (°C): -30℃~+80℃

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This DFRobot Gravity: 360 Degree Rotary Encoder Module looks like a potentiometer, but it’s an encoder switch. It is a cascadable 360 ° rotary encoder switch with 20 pulses per revolution, and each pulse corresponds to a detent. There are LED lights set for each detent to allow users visually check the real-time status of the encoder. For ease of use, the module is designed with I2C data output and configurable accuracy within 1~51 for every detent (set in the program). For instance, when it is set to 1, turn on one LED light by rotating 2.5 revolutions; when set to 51, then one LED light can be switched on by rotating one detent. In order to apply to more scenarios, the encoder is equipped with a cascade function that enables to control of multiple output devices by occupying only one I2C interface, such as, simultaneously controlling light brightness, color, volume, speed, etc. Applications: Application Field

  • Automotive electronics
  • Multimedia speaker
  • Instruments and Apparatuses
  • Smart home

Application Case

  • Volume adjustment
  • Fire regulation
  • Speed regulation
  • Light adjustment

Features:

  1. Pluggable cascade
  2. I2C Data output, forward to increase, reverse to decrease
  3. Onboard LED detent indicator
  4. Allow setting 4 different I2C addresses by address switch

Package Includes:

1 x Gravity: Rotary Encoder Module

1 x Gravity I2C/UART Sensor Connector

Quick specs

Pulse Per Revolution (PPR)
20
Operating Voltage (VDC)
3.3 to 5
Rotation angle
360°
Interface
Two Gravity connectors; I2C
Rotation Lifespan
30000±200 Cycles
Contact Resistance (ohm)
≤100mΩ
See all specifications