
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: voltage rating (v) 3.3 to 5.5; resolution ≤0.01ppm; power rating 0.05. Check that your power source supplies 3.3 to 5.5 before connecting it.
Key Highlights
- Voltage Rating (V): 3.3 to 5.5
- Resolution: ≤0.01ppm
- Power Rating: 0.05
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Voltage Rating (V) | 3.3 to 5.5 |
|---|---|
| Resolution | ≤0.01ppm |
| Power Rating | 0.05 |
| Signal Output | I2C, UART(0~3V) |
| Response Time(s) | ≤60 |
| Preheat time | ≤3min |
| Operating Temperature (°C) | -20~50 |
| Operating humidity | 15~90%RH (No condense). |
| Storage Temperature (°C) | 0~25℃ |
| Dimensions (L x W x H) mm | 27mm×37mm |
| Shipping Weight | 17 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Overview
The DFRobot Gravity Alcohol Sensor (0–5ppm), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Voltage Rating (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Resolution: ≤0.01ppm
- Power Rating: 0.05
- Signal Output: I2C, UART(0~3V)
- Response Time(s): ≤60
- Preheat time: ≤3min
- Operating Temperature (°C): -20~50
- Operating humidity: 15~90%RH (No condense).
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is an Arduino-compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air, the sensor is well applicable to the small alcohol concentration measurement in breathalyzers, smart vehicles, and so on. Based on the electrochemistry principle, this alcohol sensor has been calibrated before the factory. It is characterized by strong anti-interference, high stability, and sensitivity, and up to 2 years of service life. The module supports 0.01ppm(10ppb) resolution and 3.3~5.5V wide-range voltage input and works well with mainstream controllers like Arduino, ESP32, and Raspberry Pi. With the easy-to-use Gravity interface and the sample program provided by us, you can conveniently build your alcohol concentration detector using this sensor.
Useful link:
DFRobot Gravity Alcohol sensor tutorial.
Features:
- Detected Gas: alcohol.
- Interfering Gas: benzene(C6H6), toluene(C7H8), acetic acid(CH3COOH), hydrogen sulfide(H2S), carbon monoxide(CO).
- Factory-calibrated, accurate data
- High sensitivity, low power
- Stable performance, anti-interference
- I2C and UART outputs
- Excellent linear output
- Long service life
- Compatible with 3.3~5V controllers
- Reverse-connection protection
Useful Link:
Getting Started with DFRobot Gravity Alcohol Sensor
Packages Includes:
1 x DF Robot Gravity Alcohol Sensor (0-5ppm).
Quick specs
- Voltage Rating (V)
- 3.3 to 5.5
- Resolution
- ≤0.01ppm
- Power Rating
- 0.05
- Signal Output
- I2C, UART(0~3V)
- Response Time(s)
- ≤60
- Preheat time
- ≤3min


















