
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: sensor type Semiconductor; power supply voltage (v) 5; interface Analog. Check that your power source supplies 5 before connecting it.
Key Highlights
- Sensor Type: Semiconductor
- Power Supply Voltage (V): 5
- Interface: Analog
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Sensor Type | Semiconductor |
|---|---|
| Power Supply Voltage (V) | 5 |
| Interface | Analog |
| Loop Voltage(Vc) | ≤10V |
| Heater Resistance | 31±3Ω |
| Sensor Resistance | 2KΩ-20KΩ(in 100ppm CO) |
| Humidity Range | 65%±5%RH |
| Dimensions (L x W x H) mm | 36.4x26.6 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Overview
The DFRobot Gravity Analog CO/Combustible Gas Sensor MQ9, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Sensor Type: Semiconductor
- Power Supply Voltage (V): 5 (match this to your power supply; too high a voltage can damage the part)
- Interface: Analog (confirm your cable or board uses the same connector)
- Loop Voltage(Vc): ≤10V (match this to your power supply; too high a voltage can damage the part)
- Heater Resistance: 31±3Ω
- Sensor Resistance: 2KΩ-20KΩ(in 100ppm CO)
- Humidity Range: 65%±5%RH (quoted range is usually line-of-sight; walls and interference shorten it)
- Dimensions (L x W x H) mm: 36.4x26.6 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is an Arduino CO/Combustible Gas sensor. It uses MQ-9 to detect Carbon Monoxide. The sensor can be used to detect different gases containing CO and combustible gases, it is low cost and suitable for a variety of applications. The core sensing material of the MQ-9 gas sensor is SnO2, which has lower conductivity in clean air. It makes detection by cycling high and low temperatures and detects CO when low temperature (heated by 1.5V). The sensor’s conductivity is higher along with the gas concentration rising. When temperature rises (heated by 5.0V), it detects Methane, Propane, combustible gas, etc, and cleans the other gases adsorbed under low temperature.
- Domestic gas leakage detector
- Industrial gas detector
- Portable gas detector
Features:
- Good sensitivity to CO/Combustible gas
- High sensitivity to Methane, Propane and CO
- Long life and low cost
- Simple drive circuit
- Heater consumption: ≤350mW
- Sensing Resistance: 2KΩ-20KΩ(in 100ppm CO )
- Sensitivity: Rs(in air)/Rs(100ppm CO)≥5
- Concentration:10-1000ppm CO ,00-10000ppm combustible gas
- Good sensitivity to CO/Combustible gas
- Slope: α ≤0.6(R300ppm/R100ppm CO)
- Tem. Humidity: 20℃±2℃; 65%±5%RH
- High sensitivity to Methane, Propane and CO
Package Includes:
1 x DFRobot Gravity Analog CO/Combustible Gas Sensor (MQ9) For Arduino
Quick specs
- Sensor Type
- Semiconductor
- Power Supply Voltage (V)
- 5
- Interface
- Analog
- Loop Voltage(Vc)
- ≤10V
- Heater Resistance
- 31±3Ω
- Sensor Resistance
- 2KΩ-20KΩ(in 100ppm CO)


















