Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: heating resistance 30.0±5%Ω; heater current 200mA; heating power (w) 1200mW.

Key Highlights

  • Heating Resistance: 30.0±5%Ω
  • Heater Current: 200mA
  • Heating Power (W): 1200mW

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Heating Resistance30.0±5%Ω
Heater Current200mA
Heating Power (W)1200mW
Operating Temperature (°C)20-50
Size (mm)32x42mm (1.26×1.65″)
Shipping Weight0.004 kg
Shipping Dimensions4 × 4 × 2 cm

Overview

The DFRobot Gravity Analog CO2 Sensor MG811 for Arduino, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Heating Resistance: 30.0±5%Ω
  • Heater Current: 200mA (your supply must deliver at least this much current)
  • Heating Power (W): 1200mW
  • Operating Temperature (°C): 20-50
  • Size (mm): 32x42mm (1.26×1.65″) (measure your mounting space before ordering)
  • Shipping Weight: 0.004 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 4 × 4 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The greenhouse Effect" is melting the Earth's ice core every minute and creating dangerous icebergs. By knowing the exact concentration of CO2(Carbon Dioxide), we can do something to reduce the CO2 and to protect our Earth. Here is the Arduino-based CO2 sensor designed by DFRobot's lovely engineer. This is the first CO2 sensor in the Arduino market.  The output voltage of the module falls as the concentration of CO2 increases. The potentiometer onboard is designed to set the threshold of voltage. As long as the CO2 concentration is high enough (the voltage is lower than the threshold),  a digital signal (ON/OFF) will be released. It has an MG-811 sensor module which is highly sensitive to CO2 and less sensitive to alcohol and CO, low humidity & temperature dependency.  The onboard heating circuit brings the best temperature for the sensor to function. Internal power boosting to 6V for heating sensor best performance. This sensor has an onboard conditioning circuit for amplifying the output signal.


Connection Diagram:


Useful Link:

https://wiki.dfrobot.com/CO2_Sensor_SKU_SEN0159  


Features:

  1. Good sensitivity and selectivity to CO2
  2. Low humidity and temperature dependency
  3. Long stability and reproducibility

Package Includes:

1 x DFRobot Gravity Analog CO2 Gas Sensor For Arduino (MG-811 Sensor)

Quick specs

Heating Resistance
30.0±5%Ω
Heater Current
200mA
Heating Power (W)
1200mW
Operating Temperature (°C)
20-50
Size (mm)
32x42mm (1.26×1.65″)
Shipping Weight
0.004 kg
See all specifications