
1 / 4 · Click to enlarge
AI Summary
This Hall-effect sensor measures AC and DC currents up to ±50A with a linear analog output. Its Gravity interface and through-hole terminals make it easy to integrate into motor control and over-current detection projects.
Key Highlights
- Measures DC currents from -50A to 50A with linear analog output
- Hall-effect sensor provides isolated current measurement
- Gravity 3-pin interface for simple plug-and-play connection
- Low 0.08mΩ impedance and low-hysteresis magnetic core
- Fast 3.64μs response time and 80kHz bandwidth
- Through-hole vias and slots accept thick wires and T-connectors
Ideal For
- Robotics engineers building motor control systems
- RC hobbyists needing over-current protection
- Electronics students learning about current sensing
- Makers developing power monitoring projects
- Industrial automation technicians
Buying Tip
Ensure your project can supply a stable 5V and that your microcontroller's analog input can handle the sensor's output voltage range.
Elecvora expert review
Our verdict
The DFRobot Gravity Analog Current Sensor 50A AC/DC V2 offers a practical solution for high-current measurements with its Hall-effect design and easy-to-use Gravity interface. It balances performance and simplicity, making it suitable for both hobbyist and professional projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Measures both AC and DC currents up to 50A
- Isolated measurement via Hall-effect sensor
- Fast response and wide bandwidth
- Gravity interface simplifies connections
- Low impedance reduces power loss
Cons
- Requires soldering for high-current connections
- Needs a 5V supply and analog input
- No onboard amplification or digital output
Best for
Motor control and over-current detection in robotics and RC
Not ideal for
Low-current precision measurements below 1A
Specifications
| Operating Voltage (V) | 5 |
|---|---|
| Signal Type | Analog |
| Current Measuring Range DC | -50A to 50A |
| Frequency Bandwidth (KHz) | 80kHz |
| Response Time (uS) | 3.64μs |
| Operating Temperature (°C) | -40°C to 125°C |
| Overall Dimension | 32×42mm/1.26×1.65" |
| Shipping Weight | 0.019 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 1 x Gravity: Analog Current Sensor 50A (AC/DC)
- 1 x Gravity 3P Connector
Frequently Asked Questions
Can this sensor measure both AC and DC currents?
What is the output signal type?
What power supply does the sensor require?
Is the sensor compatible with Arduino?
What is included in the package?
How do I connect high-current wires?
Overview
The DFRobot Gravity Analog Current Sensor 50A AC/DC V2 is a Hall-effect-based module that provides accurate, isolated current measurement for both AC and DC systems. It outputs an analog voltage proportional to the current flowing through its conductor, allowing microcontrollers to read current values with a simple analog input. The sensor is built around a low-hysteresis magnetic core and offers a low current impedance of 0.08mΩ, which helps minimize power loss and heat generation. Its through-hole vias and slots are designed to accept thick electrical wires and T-shaped connectors, and the polarity markings on the board make wiring straightforward.
Key Features
- Wide current range: Measures DC currents from -50A to 50A, suitable for a variety of high-current applications.
- AC/DC compatibility: Works with both alternating and direct current, thanks to the Hall-effect sensing principle.
- Gravity interface: A standard 3-pin connector simplifies connection to Gravity-compatible boards and sensors.
- Fast response: A response time of 3.64μs and a bandwidth of 80kHz enable capture of rapid current changes.
- Robust design: Enhanced heat dissipation and circuit protection features support reliable operation in demanding conditions.
Specifications Explained
The 5V operating voltage aligns with common microcontroller logic levels, making the sensor easy to power and read. The analog signal output varies linearly with the sensed current, so a simple analog-to-digital conversion yields the current value. The -50A to 50A DC range covers many motor control and power monitoring scenarios, while the 80kHz bandwidth and 3.64μs response time ensure the sensor can track fast current transients. Operating temperature from -40°C to 125°C allows use in harsh environments. The compact 32×42mm board fits into tight spaces, and the 0.019 kg shipping weight reflects its lightweight construction.
Compatibility and Requirements
The sensor requires a 5V power supply and connects via the Gravity 3-pin interface, which is compatible with standard Gravity cables and boards. The through-hole terminals accept thick wires and T-shaped connectors, but note that soldering is required for permanent connections. No additional components are needed beyond a power source and a device capable of reading analog voltages.
Typical Uses
- Motor control and monitoring in robotics and RC projects
- Load detection and management in power systems
- Over-current detection in aeromodelling and robot platforms
- General AC/DC current measurement in electronic projects
What's in the Box
- 1 x Gravity: Analog Current Sensor 50A (AC/DC)
- 1 x Gravity 3P Connector
Quick specs
- Operating Voltage (V)
- 5
- Signal Type
- Analog
- Current Measuring Range DC
- -50A to 50A
- Frequency Bandwidth (KHz)
- 80kHz
- Response Time (uS)
- 3.64μs
- Operating Temperature (°C)
- -40°C to 125°C


















