Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; voltage rating (v) 3.3 to 5.5; interface Analog. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Voltage Rating (V): 3.3 to 5.5
  • Interface: Analog

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Voltage Rating (V)3.3 to 5.5
InterfaceAnalog
Length (mm)30
Width (mm)22
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The DFRobot Gravity Analog Grayscale Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Voltage Rating (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Interface: Analog (confirm your cable or board uses the same connector)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 22 (measure your mounting space before ordering)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 9 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This gray scale sensor is able to measure the intensity of light from black to white.  A gray scale is also known as black-and-white, are composed exclusively of shades of gray, varying from black at the weakest intensity to white at the strongest.
Sample of grayscale sensor
                                                                                                                     Gray Scale
The gray scale sensor for arduino is a composition of a photocell (light-controlled variable resistor) and a integrated white LED on board aiming just front of the sensor. It's connected LED will let you compare and provide some reflective feedback to analyse gray scale light ranges. Different colors will apply but only gray scale values will be outputted. This new design includes a much better quality connector that increases life span of the sensor, better voltage range and easy to use. This is a common sensor for automatic lamps that are turned on when light is not enough. For example, with lack of sun light the value will be low enough and this value can be used to trigger a relay to enable a lamp and shutdown the lamp when the sunlight is back.  Other light sensitive devices could be used for simple data transmission, like Morse code with a flash light. And can also be used as a line following (tracking ) sensor.

Useful link:

For more information refer to the tutorial.  

Features:

  1. Wide voltage range from 3.3V to 5V
  2. Standard assembling struct (two 3mm holes with multiple of 5cm as interval)
  3. Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  4. Icons to simplely illustrate sensor function
  5. High quality connector
  6. Immersion gold surface

Package Includes:

1 x Analog Grayscale Sensor V2

1 x Analog cable

Quick specs

Item Type
Sensor
Voltage Rating (V)
3.3 to 5.5
Interface
Analog
Length (mm)
30
Width (mm)
22
Shipping Weight
0.015 kg
See all specifications