
1 / 6 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 6; interface Analog; operating current (ma) <10mA. Check that your power source supplies 3.3 to 6 before connecting it.
Key Highlights
- Operating Voltage (V): 3.3 to 6
- Interface: Analog
- Operating Current (mA): <10mA
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (V) | 3.3 to 6 |
|---|---|
| Interface | Analog |
| Operating Current (mA) | <10mA |
| Dimensions (L x W x H) mm | 35 x 22(mm), 1.378″ x 0.866″(in) |
| Shipping Weight | 0.054 kg |
| Shipping Dimensions | 14 × 6 × 3 cm |
Overview
The DFRobot Gravity Analog Heart Rate ECG Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (V): 3.3 to 6 (match this to your power supply; too high a voltage can damage the part)
- Interface: Analog (confirm your cable or board uses the same connector)
- Operating Current (mA): <10mA (your supply must deliver at least this much current)
- Dimensions (L x W x H) mm: 35 x 22(mm), 1.378″ x 0.866″(in) (measure your mounting space before ordering)
- Shipping Weight: 0.054 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 14 × 6 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The DFRobot Heart Rate Monitor Sensor is used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG and output as an analog reading. An ECG signal can be extremely noisy so we have included an AD8232 chip which will generate a clear signal from the PR and QT Intervals. Using the Arduino IDE "Serial Plotter" feature, you are also able to view plotted ECG output on a PC easing the difficulty of using this sensor, a gravity Interface is adapted to allow plug&play. The IO expansion shield is the best match for this sound sensor connecting to your Arduino. As this sensor can work at 3.3V which makes it compatible with raspberry pie, intel Edison, joule, and curie.
Useful Link:
https://wiki.dfrobot.com/Heart_Rate_Monitor_Sensor_SKU__SEN0213
Features:
- ECG method, accurate and stable
- Three electrodes
- 3.3.3V/5V compatible
- AD8232 chip which will generate a clear signal from the PR and QT Intervals
Package Includes:
1 x DFRobot Gravity: Analog Heart Rate Monitor Sensor
Quick specs
- Operating Voltage (V)
- 3.3 to 6
- Interface
- Analog
- Operating Current (mA)
- <10mA
- Dimensions (L x W x H) mm
- 35 x 22(mm), 1.378″ x 0.866″(in)
- Shipping Weight
- 0.054 kg
- Shipping Dimensions
- 14 × 6 × 3 cm


















