Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.3 to 5.5; output voltage 0~3.0; connector type BNC. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Operating Voltage (VDC): 3.3 to 5.5
  • Output Voltage: 0~3.0
  • Connector Type: BNC

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (VDC)3.3 to 5.5
Output Voltage0~3.0
Connector TypeBNC
ProbesIndustrial Grade
Operating Temperature (°C)0~60
Shipping Weight0.35 kg
Shipping Dimensions22 × 8 × 6 cm

Overview

The DFRobot Gravity Analog pH Sensor Pro Kit V2 Industrial, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (VDC): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Output Voltage: 0~3.0 (match this to your power supply; too high a voltage can damage the part)
  • Connector Type: BNC (confirm your cable or board uses the same connector)
  • Probes: Industrial Grade
  • Operating Temperature (°C): 0~60
  • Shipping Weight: 0.35 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 22 × 8 × 6 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DFRobot Gravity: Analog pH Sensor pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing. You may also check the Liquid Sensor Selection Guide to get better familiar with our liquid sensor series. As an upgraded version of pH meter pro V1, the secondary generation pH meter pro greatly improves the precision and user experience. The onboard voltage regulator chip supports the wide voltage supply of 3.3~5.5V, which is compatible with 5V and 3.3V main control boards, such as Arduino and LattePanda. The output signal filtered by hardware has low jitter. The software library adopts the two-point calibration method, and can automatically identify two standard buffer solutions (4.0 and 7.0), so simple and convenient. It uses an industry electrode and has a built-in simple, convenient, practical connection and long life, very suitable for online monitoring.   This industry pH combination electrode is made of a sensitive glass membrane with low impedance. It can be used in a variety of PH measurements with fast response, and good thermal stability. It has good reproducibility, difficult to hydrolysis, and basically eliminates the alkali error. Between 0 to 14 pH range, the output voltage of the electrode is linear. The reference system which consists of the Ag/AgCl gel electrolyte salt bridge has a stable half-cell potential and excellent anti-pollution performance. The ring PTFE membrane is not easy to be clogged, so the electrode is suitable for long-term online detection. With this product, the main control board (such as Arduino), and the software library, you can quickly build the pH meter, plug, and play, no welding. DFRobot provides a variety of water quality sensor products, uniform size, and interface, not only meeting the needs of various water quality testing but are also suitable for the DIY of multi-parameter water quality tester. You may also check Liquid Sensor Selection Guide to get better familiar with our liquid sensor series. The pH is a value that measures the acidity or alkalinity of the solution. It is also called the hydrogen ion concentration index. The pH is a scale of hydrogen ion activity in the solution. The pH has a wide range of uses in medicine, chemistry, and agriculture. Usually, the pH is a number between 0 to 14. Under the thermodynamic standard conditions, pH=7, which means the solution is neutral; pH<7, which means the solution is acidic; pH>7, which means the solution is alkaline. Arduino Connection Diagram


Useful Link:

https://wiki.dfrobot.com/Gravity__Analog_pH_Sensor_Meter_Kit_V2_SKU_SEN0161-V2


Features:

  1. 3.3~5.5V wide voltage input
  2. Hardware filtered output signal, low jitter
  3. Gravity connector and BNC connector, plug-and-play, no soldering required
  4. Software library supports two-point calibration and automatically identifies standard buffer solution
  5. Uniform size and connector, convenient for the design of mechanical structures
  6. Industrial Probe - Support 7*24 Measurement
  7. Upgraded Transmitter - More Accurate and Stable

Signal Conversion Board (Transmitter) V2

  1. Signal Connector: PH2.0-3P
  2. Measurement Accuracy: ±0.1@25℃
  3. Dimension: 42mm*32mm/1.66*1.26in

pH Probe

  1. Response Time: <1min
  2. Probe Life: 7*24hours >0.5 years (depending on the water quality)
  3. Cable Length: 500cm

Useful Links:

Getting Statred


Package Includes:

1 x pH Probe (Industrial Grade)

1 x pH Signal Conversion Board V2

1 x Gravity Analog Sensor Cable

2 x Waterproof Gasket

1 x Screw Cap for BNC Connector

4 x M3 * 10 nylon pillar

8 x M3 * 5 screws

Quick specs

Operating Voltage (VDC)
3.3 to 5.5
Output Voltage
0~3.0
Connector Type
BNC
Probes
Industrial Grade
Operating Temperature (°C)
0~60
Shipping Weight
0.35 kg
See all specifications