
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.3 to 5.5; measurement range 0~1000ppm (TDS); measurement accuracy ± 10% F.S. (25 ℃) TDS. Check that your power source supplies 3.3 to 5.5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 3.3 to 5.5
- Measurement Range: 0~1000ppm (TDS)
- Measurement Accuracy: ± 10% F.S. (25 ℃) TDS
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 3.3 to 5.5 |
|---|---|
| Output Voltage | 0 ~ 2.3V |
| Working Current (mA) | 3 ~ 6mA |
| Measurement Range | 0~1000ppm (TDS) |
| Measurement Accuracy | ± 10% F.S. (25 ℃) TDS |
| Module Size | 42 * 32mm |
| Interface | Module interface: PH2.0-3P, Electrode Interface: XH2.54-2P |
| Shipping Weight | 0.032 kg |
| Shipping Dimensions | 13 × 8 × 3 cm |
Overview
The DFRobot Gravity Analog TDS Sensor Meter for Arduino, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 0 ~ 2.3V (match this to your power supply; too high a voltage can damage the part)
- Working Current (mA): 3 ~ 6mA (your supply must deliver at least this much current)
- Measurement Range: 0~1000ppm (TDS) (quoted range is usually line-of-sight; walls and interference shorten it)
- Measurement Accuracy: ± 10% F.S. (25 ℃) TDS
- Module Size: 42 * 32mm (measure your mounting space before ordering)
- Interface: Module interface: PH2.0-3P, Electrode Interface: XH2.54-2P (confirm your cable or board uses the same connector)
- Shipping Weight: 0.032 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Gravity: Analog TDS Sensor/Meter for Arduino is an Arduino-compatible TDS Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. TDS meter can be applied to domestic water, hydroponic and other fields of water quality testing. You may also check Liquid Senser Selection Guide to get better familiar with our liquid sensor series. TDS (Total Dissolved Solids) indicates that how many milligrams of soluble solids dissolved in one liter of water. In general, the higher the TDS value, the more soluble solids dissolved in water, and the less clean the water is. Therefore, the TDS value can be used as one of the references for reflecting the cleanliness of water. TDS pen is widely used equipment to measure TDS value. The price is affordable, and it is easy to use, but it is not able to transmit data to the control system for online monitoring to do some water quality analysis. The professional instrument has high accuracy and can send data to the control system, but the price is expensive for ordinary people. To this end, we have launched an analog TDS sensor kit that is compatible with Arduino, plug, and play, easy to use. Matching with Arduino controller, you can build a TDS detector easily to measure the TDS value of liquid. This DFRobot Gravity: Analog TDS Sensor/ Meter for Arduino supports 3.3 ~ 5.5V wide voltage input, and 0 ~ 2.3V analog voltage output, which makes it compatible with a 5V or 3.3V control system or board. The excitation source is an AC signal, which can effectively prevent the probe from polarization and prolong the life of the probe, meanwhile, increase the stability of the output signal. The TDS probe is waterproof, it can be immersed in water for a long time measurement.
Features:
- Wide Voltage Input: 3.3~5.5V
- Good Compatibility Output: 0~2.3V analog signal output, compatible with 5V or 3.3V controller
- AC Excitation Source: effectively prevent the probe from polarization
- Waterproof Probe
- Easy to Use: Arduino compatible, simple connection, plug, and play without soldering
Useful link:
For more information refer to the tutorial.Packages Includes:
1 x DFRobot Gravity: Analog TDS Sensor/ Meter for ArduinoQuick specs
- Operating Voltage (VDC)
- 3.3 to 5.5
- Output Voltage
- 0 ~ 2.3V
- Working Current (mA)
- 3 ~ 6mA
- Measurement Range
- 0~1000ppm (TDS)
- Measurement Accuracy
- ± 10% F.S. (25 ℃) TDS
- Module Size
- 42 * 32mm


















