
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: input supply range (vdc) 5; current consumption 40; response time (ms) <500.
Key Highlights
- Input Supply Range (VDC): 5
- Current consumption: 40
- Response Time (mS): <500
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Input Supply Range (VDC) | 5 |
|---|---|
| Current consumption | 40 |
| Response Time (mS) | <500 |
| Insulation Resistance (MOhm) | 100M |
| Operating Temperature (°C) | 5 - 90 °C |
| Storage Temperature (°C) | -10 to 90 |
| Length (mm) | 38 |
| Width (mm) | 28 |
| Weight (g) | 30 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Overview
The DFRobot Gravity Analog Turbidity Sensor for Arduino, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Input Supply Range (VDC): 5 (quoted range is usually line-of-sight; walls and interference shorten it)
- Current consumption: 40 (your supply must deliver at least this much current)
- Response Time (mS): <500
- Insulation Resistance (MOhm): 100M
- Operating Temperature (°C): 5 - 90 °C
- Storage Temperature (°C): -10 to 90 (space for firmware, files or media)
- Length (mm): 38 (measure your mounting space before ordering)
- Width (mm): 28 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Arduino turbidity sensor detects water quality by measuring the level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases
This Arduino turbidity sensor has both analog and digital signal output modes. You can select the mode according to the MCU as the threshold is adjustable in digital signal mode.
Turbidity sensors can be used in the measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research, and laboratory measurements
Connection Diagram:
Useful link:
Interfacing of DFRobot Gravity Analog Turbidity Sensor For Arduino
Package Includes:
1 x DFRobot Gravity Analog Turbidity Sensor For Arduino
1 x Turbidity sensor adapter
1 x Turbidity sensor probe
1 x Turbidity sensor cable
Quick specs
- Input Supply Range (VDC)
- 5
- Current consumption
- 40
- Response Time (mS)
- <500
- Insulation Resistance (MOhm)
- 100M
- Operating Temperature (°C)
- 5 - 90 °C
- Storage Temperature (°C)
- -10 to 90



















