
1 / 4 · Click to enlarge
AI Summary
A compact analog voltage divider module that reduces input voltage by 5x, enabling microcontrollers to safely measure up to 25V. The Gravity connector and clearly labeled ports make it easy to integrate into projects.
Key Highlights
- Measures input voltages from 0.0245V to 25V
- 5:1 voltage reduction for safe microcontroller input
- Gravity analog interface with clear A/D markings
- Operating voltage of 3.3V to 5V
- Immersion gold surface for durability
- Two 3mm mounting holes at 5mm intervals
Ideal For
- Makers building Arduino-based voltage monitoring projects
- Students learning about analog sensors and voltage division
- Engineers needing a compact voltage sensing solution
- DIY enthusiasts monitoring battery levels
- Educators demonstrating resistor divider principles
Buying Tip
Remember that the module divides voltage by 5, so ensure your microcontroller's ADC reference voltage matches the module's output range for accurate readings.
Elecvora expert review
Our verdict
The DFRobot Gravity Analog Voltage Divider V2 is a straightforward, well-built module that simplifies voltage measurement in microcontroller projects. Its wide input range and standardized connector make it a reliable choice for both beginners and experienced users.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide input voltage range up to 25V
- Easy to use with Gravity connector
- Compact and lightweight
- Durable immersion gold finish
Cons
- Requires a microcontroller with analog input
- Limited to 5:1 division ratio
- No built-in protection against reverse polarity
Best for
Arduino and microcontroller projects needing voltage monitoring
Not ideal for
High-precision laboratory measurements or voltages above 25V
Specifications
| Operating Voltage (V) | 25 |
|---|---|
| Interface | Analog |
| Length (mm) | 30 |
| Width (mm) | 22 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 1 x DFRobot Gravity: Analog Voltage Divider V2
Frequently Asked Questions
What is the maximum input voltage this module can handle?
Can I use this module with a 3.3V microcontroller?
How do I calculate the actual voltage from the analog reading?
Does the module come with cables?
Is the module suitable for measuring AC voltage?
What is the purpose of the "D" marking on the connector?
Overview
The DFRobot Gravity Analog Voltage Divider V2 is a resistor-based module that scales down an input voltage by a factor of five, making it possible for microcontrollers with a maximum analog input of 5V to measure higher voltages safely. With a detection range from 0.0245V to 25V, it is a practical solution for monitoring batteries, power supplies, and other DC voltage sources in embedded projects.
The module is part of the Gravity series, featuring a standardized connector and clearly labeled ports: "A" for analog and "D" for digital. This design simplifies wiring and reduces the risk of incorrect connections, making it suitable for both beginners and experienced users.
Key Features
- Wide voltage range: Detects input voltages from 0.0245V to 25V, covering a broad spectrum of low-voltage applications.
- 5:1 voltage division: Reduces the input voltage by a factor of five, ensuring compatibility with 5V analog inputs.
- Gravity interface: Standardized connector with clear labeling for quick and secure connections.
- Durable construction: Immersion gold surface enhances corrosion resistance and longevity.
- Easy mounting: Two 3mm holes spaced at 5mm intervals allow for secure installation in enclosures or on panels.
- Flexible power supply: Operates from 3.3V to 5V, suitable for a variety of microcontroller boards.
Specifications Explained
Operating Voltage (25V): This is the maximum input voltage the module can handle. It does not require a separate power supply; the input voltage itself is divided and measured. The module's own operating voltage is 3.3V to 5V, which is supplied by the microcontroller.
Interface (Analog): The output is an analog voltage proportional to the input, which can be read by any analog-to-digital converter (ADC) on a microcontroller.
Dimensions (30mm x 22mm): The compact board size makes it easy to integrate into tight spaces.
Shipping Weight (0.015 kg): Lightweight, minimizing shipping costs and suitable for small projects.
Compatibility and Requirements
The module is designed to work with microcontrollers that have analog inputs and can supply 3.3V or 5V. It is compatible with popular platforms such as Arduino and Raspberry Pi (with external ADC). The Gravity connector ensures plug-and-play compatibility with other Gravity sensors and shields. No additional components are required for basic operation, though a microcontroller with an ADC is necessary to read the output.
Typical Uses
- Monitoring battery voltage in portable projects
- Measuring power supply rails in embedded systems
- Educational demonstrations of voltage division
- DIY sensor projects requiring voltage sensing
- Robotics and automation voltage feedback
What's in the Box
1 x DFRobot Gravity: Analog Voltage Divider V2 module.

Quick specs
- Operating Voltage (V)
- 25
- Interface
- Analog
- Length (mm)
- 30
- Width (mm)
- 22
- Shipping Weight
- 0.015 kg
- Shipping Dimensions
- 6 × 6 × 3 cm


















