Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: working water pressure(mpa) ≤2.0; output voltage 0.5~4.5; waterproof level IP68. Check that your power source supplies 0.5~4.5 before connecting it.

Key Highlights

  • Working water pressure(MPa): ≤2.0
  • Output Voltage: 0.5~4.5
  • Waterproof Level: IP68

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Working water pressure(MPa)≤2.0
Output Voltage0.5~4.5
Waterproof LevelIP68
Response Time (mS)<2.0
Quiescent Current2.8
Operating Temperature (°C)-20 to 85
Shipping Weight0.1 kg
Shipping Dimensions10 × 5 × 2 cm

Overview

The DFRobot Gravity Analog Water Pressure Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Working water pressure(MPa): ≤2.0
  • Output Voltage: 0.5~4.5 (match this to your power supply; too high a voltage can damage the part)
  • Waterproof Level: IP68 (the IP code tells you how much dust and water the casing keeps out)
  • Response Time (mS): <2.0
  • Quiescent Current: 2.8 (your supply must deliver at least this much current)
  • Operating Temperature (°C): -20 to 85
  • Shipping Weight: 0.1 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 10 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a water pressure sensor that adopts a DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers. Coordinate with a DFRobot Gravity IO Expansion Shield, the water pressure sensor can be plugged into an Arduino board, wiring-free. Put it with Solenoid Valve, Water Turbine Generator, and other sensors, you can build a smart water control system. You may also check Liquid Sensor Selection Guide to get better familiar with our liquid sensor series. Briefly speaking, this water pressure sensor is a stethoscope to a water pipe. It will help you to diagnose whether there is water, how strong the water pressure is. It can be widely applied to smart home control systems (SCS), the Internet of Things (IoT), and device detections.
 

Connection Diagram:


Features:

  1. Support water pressure detection of living environmental water systems, such as houses, gardens, and farms
  2. Support water pressure detection of the outdoor environment, such as rivers, lakes, and the sea
  3. Support water pressure detection of tanks
  4. Support liquid level detection in special situation detection in specified liquid

Useful Links:


Package Includes:

1 x Gravity: Analog Water Pressure Sensor 1 x G1/2 to G1/4 Connector (mounted)

Quick specs

Working water pressure(MPa)
≤2.0
Output Voltage
0.5~4.5
Waterproof Level
IP68
Response Time (mS)
&lt;2.0
Quiescent Current
2.8
Operating Temperature (°C)
-20 to 85
See all specifications