
1 / 3 · Click to enlarge
AI Summary
A compact Gravity-format breakout for the Bosch BMM150 three-axis geomagnetic sensor, giving your project compass heading and magnetic field readings over I2C. Its DIP switch selects one of four I2C addresses, so multiple sensors can share a single bus.
Key Highlights
- Bosch BMM150 three-axis geomagnetic sensor on a Gravity breakout
- Wide range of ±1300uT on X/Y and ±2500uT on Z axis
- Fine 0.3uT resolution with low noise of 0.3-1.4uT
- Four I2C addresses selectable via onboard 2-bit DIP switch
- Runs from 3.3V to 5V with 1.7mA draw at 10Hz
- Fast 3ms start-up for responsive orientation readings
Ideal For
- Robotics builders adding compass heading to navigation code
- Drone and UAV developers working on orientation sensing
- Students learning I2C sensor integration
- Makers building handheld navigation or mapping devices
- Motion-tracking and AR experimenters
Buying Tip
Check that your project has a free I2C bus and set the DIP switch address before wiring, so the sensor does not clash with other devices on the same bus.
Elecvora expert review
Our verdict
A tidy, low-power magnetometer module that removes the soldering work from BMM150 projects. The DIP-switch addressing and Gravity connector make it especially friendly for multi-sensor builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Gravity connector simplifies wiring
- Four selectable I2C addresses
- Low noise and 0.3uT resolution
- Wide 3.3V-5V input range
- Compact and lightweight
Cons
- Requires your own calibration code for best accuracy
- Bare sensor data, no built-in heading output
- Not a full IMU on its own
Best for
Makers and robotics developers needing a simple I2C compass sensor
Not ideal for
Users wanting a plug-and-play compass with no coding
Specifications
| Power Supply Voltage (V) | 3.3V-5V |
|---|---|
| Operating Temperature (°C) | -40 to 85℃ |
| Communication Mode | I2C |
| Resolution | 0.3μT |
| Zero current (offset) | ±40μT/±2μT (software optimized) |
| Non-linearity | <1%FS |
| Measuring Current Range | ±1300μT (x & y axis), ±2500μT (z-axis) |
| Operating Current (mA) | 1.7mA@ frequency 10Hz |
| Low Noise | 0.3-1.4μT |
| Start-up Time | 3ms |
| Shipping Weight | 0.013 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 1 x Gravity BMM150 Triple Axis Magnetometer Sensor
- 1 x Gravity-4P I2C/UART sensor cable
- 1 x Black single-row 5-pin header
Frequently Asked Questions
What voltage does the sensor need?
How many sensors can share the same I2C bus?
Does it come with a cable?
What is the measuring range?
Do I need to calibrate it?
What is the operating temperature range?
Overview
The DFRobot Gravity BMM150 is a ready-to-use carrier board for the Bosch BMM150, a three-axis geomagnetic sensor designed for compass and orientation work. Instead of soldering a bare chip, you get a Gravity-format module with a standard connector, so it drops into prototyping setups quickly and reads magnetic field data over I2C.
It is aimed at makers, students and engineers who need heading information in robots, drones, handheld navigation devices or motion-tracking builds. Because the sensor reports field strength on three perpendicular axes, it can support compass angle calculations and tilt-compensated heading when combined with your own code.
Key Features
- Three-axis sensing: measures the magnetic field along X, Y and Z for full spatial orientation data.
- Generous measuring range: ±1300uT on the X and Y axes and ±2500uT on the Z axis.
- Low noise, fine resolution: 0.3uT resolution with noise between 0.3 and 1.4uT.
- Flexible addressing: a 2-bit DIP switch sets one of four I2C addresses.
- Simple power: accepts 3.3V to 5V, matching most common microcontroller boards.
- Programmable interrupt pin: available for event-driven designs.
Specifications Explained
Range: the ±1300uT X/Y and ±2500uT Z ranges mean the sensor can handle ordinary Earth-field compass work and stronger nearby magnetic fields without saturating easily.
Resolution and noise: 0.3uT resolution combined with 0.3-1.4uT noise gives smooth, usable readings for heading and orientation. The stated zero offset of ±40uT, or ±2uT after software optimisation, indicates that light calibration in your code will improve accuracy.
Power and current: 3.3V-5V input and 1.7mA at 10Hz make it easy to power from logic boards and battery-driven projects. Start-up takes only 3ms, so readings are available almost immediately after power-up.
Non-linearity: under 1% of full scale keeps response consistent across the measuring range.
Compatibility and Requirements
The module communicates over I2C and ships with a Gravity-4P I2C/UART sensor cable plus a 5-pin single-row header. You will need a host board with an I2C bus and a supply within 3.3V to 5V. The operating temperature range of -40 to 85°C covers demanding environments. You will also need your own library or driver code to read the sensor and convert field data into heading.
Typical Uses
- Electronic compass for robots and drones
- Indoor and outdoor navigation and positioning
- Head motion tracking
- Augmented reality and tilt-compensated mapping
What's in the Box
- 1 x Gravity BMM150 Triple Axis Magnetometer Sensor
- 1 x Gravity-4P I2C/UART sensor cable
- 1 x Black single-row 5-pin header
Quick specs
- Power Supply Voltage (V)
- 3.3V-5V
- Operating Temperature (°C)
- -40 to 85℃
- Communication Mode
- I2C
- Resolution
- 0.3μT
- Zero current (offset)
- ±40μT/±2μT (software optimized)
- Non-linearity
- <1%FS


















