
1 / 4 · Click to enlarge
AI Summary
A compact blue LED module controlled from a single digital pin on 3.3V to 5V, with PWM support for smooth dimming. The 65-degree viewing angle and included digital cable make it quick to add controlled blue light to a build.
Key Highlights
- Bright blue LED with a 65-degree viewing angle for even light spread
- Single digital pin control for simple on and off switching
- PWM compatible for smooth brightness adjustment and fading effects
- Wide 3.3V to 5V operating range suits common microcontroller boards
- Compact 30 x 22 mm board weighs only 5 g for easy mounting
- Digital cable included for quick plug-and-play connection
Ideal For
- Students learning digital output and PWM on Arduino
- Makers adding status or indicator lighting to enclosures
- Designers building ambient blue accent effects
- Educators assembling electronics teaching kits
- Prototypers needing a quick plug-in light module
Buying Tip
Check that your board can supply 3.3V to 5V on the chosen pin and that you have a free digital pin, since the module uses one pin for control.
Elecvora expert review
Our verdict
A tidy, no-fuss LED module that removes the guesswork from adding controlled blue light to a microcontroller project. Its single-pin control and PWM support make it flexible for both simple indicators and gradual effects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Single digital pin control keeps wiring simple
- PWM support allows smooth brightness changes
- Wide 3.3V to 5V range suits many boards
- Compact and light at 30 x 22 mm and 5 g
- Digital cable included for quick connection
Cons
- Only blue output is available in this version
- Requires a host microcontroller and power source
- Brightness control depends on a PWM-capable pin
Best for
Makers and students adding controllable blue indicator or accent lighting
Not ideal for
Projects needing multi-colour or high-power illumination
Specifications
| Viewing Angle (Deg.) | 65° |
|---|---|
| Interface | Digital pin with cable |
| Length (mm) | 30 |
| Width (mm) | 22 |
| Weight (g) | 05 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 6 × 6 × 3 cm |
What's in the box
- 1 x Blue LED light module
- 1 x Digital cable
Frequently Asked Questions
What voltage does the module need?
How do I turn the LED on and off?
Can I dim the light?
Is a cable included?
What is the viewing angle?
How large is the module?
Overview
The DFRobot Gravity Digital Piranha LED Module in blue gives your project a clean, controllable light source without extra circuitry. It is built around a bright blue LED and connects to a microcontroller through a single digital pin using the included cable. Power it from 3.3V or 5V and switch it with a logic signal, making it a straightforward choice for beginners and experienced makers alike.
Key Features
- Blue LED output with a 65-degree viewing angle
- Digital pin interface with an included cable
- Works across a 3.3V to 5V range
- PWM compatible for gradual brightness changes
- Compact 30 x 22 mm board weighing 5 g
Specifications Explained
The 65-degree viewing angle describes how widely the light spreads from the LED. A wider spread is useful when you want to illuminate an area rather than a narrow point, such as a status panel or a small enclosure. The digital interface means the module is controlled with a simple high or low signal on one pin, keeping wiring and code minimal. Because the pin responds to PWM, you can send a varying duty cycle to dim or brighten the LED smoothly. The 30 mm length and 22 mm width keep the board small enough for tight spaces, and at 5 g it adds almost no weight to a build.
Compatibility and Requirements
The module is designed for Arduino and other microcontroller projects that provide a digital pin and a 3.3V to 5V supply. A digital cable is supplied for connecting the module. No other accessories are required beyond the host board and its power source.
Typical Uses
Use the module as a visible status indicator, an ambient accent light, or a feedback element in interactive installations. It also works well in educational kits and prototyping setups where a controllable blue light helps demonstrate digital output and PWM behaviour.
What's in the Box
- 1 x Blue LED light module
- 1 x Digital cable
Quick specs
- Viewing Angle (Deg.)
- 65°
- Interface
- Digital pin with cable
- Length (mm)
- 30
- Width (mm)
- 22
- Weight (g)
- 05
- Shipping Weight
- 0.008 kg



















