Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5.5; signal output I2C, UART (0~3V), analog voltage; life cycle >2 years (in air). Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3 to 5.5
  • Signal Output: I2C, UART (0~3V), analog voltage
  • Life Cycle: >2 years (in air)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3 to 5.5
Signal OutputI2C, UART (0~3V), analog voltage
Life Cycle>2 years (in air)
Operating humidity0-99% RH (non-condensing)
Operating Temperature (°C)-20°C ~ +50°C
Dimensions (L x W x H) mm32mm x 27mm/1.26 x 1.06 inch
Response Time(s)<5S
Mounting Hole Diameter (mm)inner diameter 3.1mm(0.12 inch)/outer diameter 6mm(0.24 inch)
Shipping Weight0.115 kg
Shipping Dimensions13 × 9 × 5 cm

Overview

The DFRobot Gravity Electrochemical O2 Sensor 0–100% I2C, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Signal Output: I2C, UART (0~3V), analog voltage (match this to your power supply; too high a voltage can damage the part)
  • Life Cycle: >2 years (in air)
  • Operating humidity: 0-99% RH (non-condensing)
  • Operating Temperature (°C): -20°C ~ +50°C
  • Dimensions (L x W x H) mm: 32mm x 27mm/1.26 x 1.06 inch (measure your mounting space before ordering)
  • Response Time(s): <5S
  • Mounting Hole Diameter (mm): inner diameter 3.1mm(0.12 inch)/outer diameter 6mm(0.24 inch)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This full-scale oxygen sensor employs the original AO2 CiTiceL oxygen sensor probe and features a measurement range of 0-100%Vol and I2C digital output, which can be adapted to application scenarios including oxygen generators, automobile exhaust, and air-fuel ratio detection. The DFRobot oxygen sensor has a built-in calibration algorithm on the signal board that can quickly perform single-point or double-point calibration so as to accurately measure the oxygen concentration in the environment. Based on the principle of electrochemistry, the sensor probe comes with strong anti-interference ability, high stability and sensitivity, and up to two years of service life. It is compatible with mainstream controllers such as Arduino, ESP32, Raspberry Pi, etc. Besides, the sensor is designed with an easy-to-use Gravity interface, and with our sample codes, you can quickly build an oxygen detector.


Useful link:

DFRobot Gravity Electrochemical Oxygen Sensor (0-100%Vol) -I2C tutorial. https://www.dfrobot.com/forum/


Features:

  1. Strong anti-interference ability
  2. High stability and sensitivity
  3. Compatible with Arduino, ESP32, Raspberry Pi

Package Includes:

1 x DFRobot Gravity Electrochemical Oxygen Sensor (0-100%Vol) - I2C

Quick specs

Operating Voltage (V)
3.3 to 5.5
Signal Output
I2C, UART (0~3V), analog voltage
Life Cycle
>2 years (in air)
Operating humidity
0-99% RH (non-condensing)
Operating Temperature (°C)
-20°C ~ +50°C
Dimensions (L x W x H) mm
32mm x 27mm/1.26 x 1.06 inch
See all specifications