
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: interface I2C; i2c address 0x52, 0x53; operating temperature (°c) -40℃~85℃.
Key Highlights
- Interface: I2C
- I2C Address: 0x52, 0x53
- Operating Temperature (°C): -40℃~85℃
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Working Current (mA) | 29 mA |
|---|---|
| Interface | I2C |
| I2C Address | 0x52, 0x53 |
| Operating Temperature (°C) | -40℃~85℃ |
| Operating humidity | 5 %RH~95 %RH |
| Measurement Range | 0ppb~65000ppb (TVOC) |
| Size (mm) | 30×22 mm/1.18×0.87 inch |
| Shipping Weight | 17 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Overview
The DFRobot Gravity ENS160 Air Quality Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Working Current (mA): 29 mA (your supply must deliver at least this much current)
- Interface: I2C (confirm your cable or board uses the same connector)
- I2C Address: 0x52, 0x53
- Operating Temperature (°C): -40℃~85℃
- Operating humidity: 5 %RH~95 %RH
- Measurement Range: 0ppb~65000ppb (TVOC) (quoted range is usually line-of-sight; walls and interference shorten it)
- Size (mm): 30×22 mm/1.18×0.87 inch (measure your mounting space before ordering)
- Shipping Weight: 17 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This Gravity: ENS160 Air Quality Sensor, based on Scio Sense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI). The innovative True VOC™ technology combines the metal oxide (MOX) technology that brings this sensor superior accuracy, fast response, anti-interference, etc. With intelligent on-chip algorithms, the ENS160 can directly output rich and easy-to-understand environmental data. Preheat the sensor 3 minutes before use then you can obtain accurate data more quickly. What's more, the built-in automatic baseline correction algorithm ensures the long-term stability of the sensor.
Connection Diagram:
Applications:
- Air purification/home automation device.
- Environmental pollution detection.
- HVAC/Ventilation system.
- Building automation/smart thermostat.
- Electrical appliances/ range hoods.
Useful link:
DFRobot Gravity ENS160 Air quality sensor tutorial.
Features:
- Multiple IAQ outputs (TVOC, eCO2, AQI), various environmental data.
- Less than 3 minutes warm-up time, get data faster.
- Built-in algorithm, more accurate output.
- Automatic baseline correction, more stable for long-term use.
Packages Includes:
1 x DF Robot Gravity ENS160 Air Quality Sensor.
Quick specs
- Working Current (mA)
- 29 mA
- Interface
- I2C
- I2C Address
- 0x52, 0x53
- Operating Temperature (°C)
- -40℃~85℃
- Operating humidity
- 5 %RH~95 %RH
- Measurement Range
- 0ppb~65000ppb (TVOC)



















