Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: voltage rating (v) 3.3 to 5; operating voltage DC3.3~5V; signal output I2C/UART. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Voltage Rating (V): 3.3 to 5
  • Operating Voltage: DC3.3~5V
  • Signal Output: I2C/UART

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Voltage Rating (V)3.3 to 5
Operating VoltageDC3.3~5V
Signal OutputI2C/UART
Shipping Weight0.01 kg
Shipping Dimensions6 × 5 × 2 cm

Overview

The DFRobot Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Voltage Rating (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage: DC3.3~5V (match this to your power supply; too high a voltage can damage the part)
  • Signal Output: I2C/UART
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The DFRobot Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART is an integrated solution combining satellite positioning (GNSS) with a high-precision real-time clock (RTC). It provides accurate timing by auto-calibrating the RTC using GNSS time, making it ideal for long-term, low-power applications. After synchronization, the GNSS chip powers off automatically, greatly reducing current consumption. Supporting both I2C and UART interfaces, it works seamlessly with Arduino, ESP32, Raspberry Pi, and other platforms. It's perfect for projects requiring precise timekeeping in outdoor or mobile environments, such as astronomy, wireless sensor networks, and NTP servers.


Features:

  1. Built-in GNSS and RTC chips
  2. Supports GPS & BeiDou signals
  3. Auto RTC time calibration via GNSS
  4. Low-power mode with GNSS shutdown
  5. I2C & UART dual communication interfaces
  6. Accurate positioning: 2.0m CEP
  7. 32.768kHz & PPS signal output
  8. Wide voltage range: 3.3V–5V

Package Includes:

1 x Gravity: GNSS Positioning & Timing module

1 x GPS / BeiDou Active Ceramic Antenna (IPEX1 Connector)

1 x Gravity 4P sensor cable

1 x 10 P connector

Quick specs

Voltage Rating (V)
3.3 to 5
Operating Voltage
DC3.3~5V
Signal Output
I2C/UART
Shipping Weight
0.01 kg
Shipping Dimensions
6 × 5 × 2 cm
See all specifications