Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name DAC Module; operating voltage (v) 3.3 to 5; communication mode I2C. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Model No. / Name: DAC Module
  • Operating Voltage (V): 3.3 to 5
  • Communication Mode: I2C

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameDAC Module
Operating Voltage (V)3.3 to 5
Communication ModeI2C
ChipGP8413
Resolution15-bit
Output Voltage0 ~ 5
No. of Channels2
Shipping Weight0.018 kg
Shipping Dimensions6 × 6 × 3 cm

Overview

The DFRobot Gravity GP8413 2-Channel 15-bit I2C to 0-5V/10V DAC Module, made by DFRobot, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: DAC Module
  • Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Communication Mode: I2C
  • Chip: GP8413
  • Resolution: 15-bit
  • Output Voltage: 0 ~ 5 (match this to your power supply; too high a voltage can damage the part)
  • No. of Channels: 2
  • Shipping Weight: 0.018 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a 2-channel DAC module with I2C communication, a resolution of 15-bit, and an accuracy of 0.2%, capable of generating analog voltage outputs of 0-10V or 0-5V. The 0-10V or 0-5V voltage range is a standard driving method. It can be widely used in automation applications such as light adjustment, frequency converters, valve regulation, and pump control. This product can drive a variety of 0-10V or 0-5V controlled devices available in the market through Arduino programming. The high precision and resolution of this module make it suitable for control scenarios that require higher signal accuracy, such as fine speed control or angle control. DAC series modules are a range of products that can be controlled through I2C or PWM signals to generate voltage or current output signals. This series of DAC products not only offers a variety of output signal ranges, but also provides three selectable resolutions: 8-bit, 12-bit, and 15-bit. It allows for the choice of either single-channel or dual-channel configurations, and multiple modules can be cascaded to form a multi-channel output.

Applications:

  1. Automatic light adjustment
  2. Variable frequency drive (VFD)
  3. Automatic valve regulation
  4. Automatic water pump control

Features:

  1. Support 3.3V-5V power supply.
  2. Output voltage error is less than 0.2%.
  3. The output voltage linearity error is 0.01%.
  4. Two channels of voltage output, either 0-5V or 0-10V, enable connection and control of standard analog voltage devices.
  5. Gravity interface, I2C communication, Arduino control, suitable for program automation control.
  6. Features 8 adjustable I2C addresses, allowing simultaneous control of up to 16 devices.
  7. The high precision and resolution of this module make it suitable for control scenarios that require higher signal accuracy.

Package Includes:

1 xGP8413: 2-Channel 15-bit I2C to 0-5V/10V DAC Module 1 x Gravity-4P I2C/UART Sensor Cable

Quick specs

Model No. / Name
DAC Module
Operating Voltage (V)
3.3 to 5
Communication Mode
I2C
Chip
GP8413
Resolution
15-bit
Output Voltage
0 ~ 5
See all specifications