
1 / 6 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5.5; resolution 1.1ppm; working current (ma) <5. Check that your power source supplies 3.3 to 5.5 before connecting it.
Key Highlights
- Operating Voltage (V): 3.3 to 5.5
- Resolution: 1.1ppm
- Working Current (mA): <5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (V) | 3.3 to 5.5 |
|---|---|
| Resolution | 1.1ppm |
| Working Current (mA) | <5 |
| Signal Output | I2C, UART output (0~3V), analog voltage |
| Operating Temperature (°C) | -20~50℃ |
| Operating humidity | 15~90%RH(Non-Condensing) |
| Storage Temperature (°C) | -20~50 |
| Storage Humidity | 15~90%RH |
| Life Cycle | >2 years (in the air) |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 13 × 9 × 4 cm |
Overview
The DFRobot Gravity HCL Sensor (Calibrated) - I2C & UART, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Resolution: 1.1ppm
- Working Current (mA): <5 (your supply must deliver at least this much current)
- Signal Output: I2C, UART output (0~3V), analog voltage (match this to your power supply; too high a voltage can damage the part)
- Operating Temperature (°C): -20~50℃
- Operating humidity: 15~90%RH(Non-Condensing)
- Storage Temperature (°C): -20~50 (space for firmware, files or media)
- Storage Humidity: 15~90%RH (space for firmware, files or media)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a HCL ( hydrogen chloride )Sensor (Calibrated) - I2C & UART sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of oxygen in the environment. Can be widely applied to fields like portable devices, air quality monitoring devices, industries, mines, warehouses, and other spaces where the air is not easy to circulate. The probe adopts the electrochemical principle, has the characteristics of strong anti-interference ability, high stability, high sensitivity, etc., and the service life is as long as two years. The sensor has 32 modifiable I2C addresses, an integrated temperature compensation algorithm, and a threshold alarm function, It has good compatibility with mainstream main control devices such as Arduino, ESP32, and Raspberry Pi. The easy-to-use Gravity interface, coupled with our sample code, can quickly build an oxygen concentration detector. If you by this product you will get ( 1 PCB, 1 Connection wire, 1 HCL Sensor (Calibrated) - I2C & UART ) All products are brand new & Comes with 6 Months Warranty. The products is easy to handle & easy to use also easy to operate with your projects,
Useful link:
DFRobot Gravity HCL sensor tutorial.
Features:
- Detection Gas: CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF(Need to change different probe)
- Factory-calibrated, accurate measurement
- High sensitivity, low power consumption
- New condition.
- Excellent stability and anti-interference
- Three output modes: I2C, UART and analog
- Long service life(2 years)
- Compatible with 3.3~5.5V main controllers
- 32 modifiable I2C addresses
- Reverse connection protection
- Temperature compensation
- Threshold alarm
Packages Includes:
1 x DFRobot Gravity HCL Sensor (Calibrated) - I2C & UART
Quick specs
- Operating Voltage (V)
- 3.3 to 5.5
- Resolution
- 1.1ppm
- Working Current (mA)
- <5
- Signal Output
- I2C, UART output (0~3V), analog voltage
- Operating Temperature (°C)
- -20~50℃
- Operating humidity
- 15~90%RH(Non-Condensing)


















