Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5.5; detection gas Hydrogen fluoride (HF); working current (ma) <5mA. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3 to 5.5
  • Detection Gas: Hydrogen fluoride (HF)
  • Working Current (mA): <5mA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3 to 5.5
Detection GasHydrogen fluoride (HF)
Working Current (mA)<5mA
Operating Temperature (°C)-20 to 50
Operating humidity15~90%RH (non-condensing)
Storage Temperature (°C)-20~50℃
Storage Humidity15~90%RH (non-condensing)
Life Cycle>2 years (in the air)
Adapter Plate Size37 x 32mm
Shipping Weight0.082 kg
Shipping Dimensions13 × 9 × 5 cm

Overview

The DFRobot Gravity HF Sensor Calibrated I2C UART Analog, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Detection Gas: Hydrogen fluoride (HF)
  • Working Current (mA): <5mA (your supply must deliver at least this much current)
  • Operating Temperature (°C): -20 to 50
  • Operating humidity: 15~90%RH (non-condensing)
  • Storage Temperature (°C): -20~50℃ (space for firmware, files or media)
  • Storage Humidity: 15~90%RH (non-condensing) (space for firmware, files or media)
  • Life Cycle: >2 years (in the air)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a sensor that detects hydrogen fluoride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen fluoride in the environment. Can be widely used in the detection of hydrogen fluoride in industrial and environmental protection fields. The probe adopts the electrochemical principle, has the characteristics of strong anti-interference ability, high stability, high sensitivity, etc., and the service life is as long as two years. The sensor has 32 modifiable I2C addresses, an integrated temperature compensation algorithm, and a threshold alarm function, It has good compatibility with mainstream main control devices such as Arduino, ESP32, and raspberry pie. The easy-to-use Gravity interface, coupled with our sample code, can quickly build a hydrogen fluoride concentration detector.DFRobot has introduced 12 gas detection sensors in this series, CO, 02, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, HF, which are used in exactly the same way and data format, so you can combine them according to your needs.


Connection Diagram:


Useful Link:

https://wiki.dfrobot.com/SKU_SEN0465toSEN0476_Gravity_Gas_Sensor_Calibrated_I2C_UART


Features:

  1. Factory calibrated, accurate measurement
  2. High sensitivity, low power consumption
  3. Excellent stability and anti-interference
  4. Three output modes: I2C, UART and analog
  5. Long service life(2 years)
  6. Compatible with 3.3~5.5V main controllers
  7. 32 modifiable I2C addresses
  8. Reverse connection protection
  9. Temperature compensation
  10. Threshold alarm
  11. It use I2C, UART and analog communication protocol to make smooth commutation between sensor and micro-controller.

Package Includes:

1 x DFRobot Gravity Hydrogen Fluoride HF Sensor Calibrated I2C, UART and analog

Quick specs

Operating Voltage (V)
3.3 to 5.5
Detection Gas
Hydrogen fluoride (HF)
Working Current (mA)
<5mA
Operating Temperature (°C)
-20 to 50
Operating humidity
15~90%RH (non-condensing)
Storage Temperature (°C)
-20~50℃
See all specifications