Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name BME680; voltage rating 3.3 to 5. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: BME680
  • Voltage Rating: 3.3 to 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameBME680
Voltage Rating3.3 to 5
Operating Current (mA)5
Length (mm)30
Width (mm)22
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The DFRobot Gravity I2C BME680 Environmental Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: BME680
  • Voltage Rating: 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Operating Current (mA): 5 (your supply must deliver at least this much current)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 22 (measure your mounting space before ordering)
  • Bluetooth Version: Supports Bluetooth 5.1 dual mode function (check your phone or controller supports the same Bluetooth version for full range)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DFRobot BME680 Environmental Sensor is a low power gas, pressure, temperature & humidity sensor based on BOSCH BME680 sensor. It is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. With DFRobot Gravity BME680 Environmental Sensor, you can monitor 4 environmental parameters simultaneously at the most. It is designed for air quality monitor, and due to the MEMS technology, BME680 has a small size and low power consumption. It can be widely used in environmental monitoring, home automation and control, Internet of Things (IoT) wearable device, GPS enhancement, etc. DFRobot Gravity BME680 environmental sensor provides a Gravity I2C connector, plug & play, easy to connect. With onboard voltage regulator IC and level translator IC, DFRobot Gravity BME680 environmental sensor shows good compatibility. It can be directly connected to 3.3V and 5V systems. Moreover, there is also a SPI connector in reserve for further expansion projects. With the development of industrialization, air pollution is getting worse and worse. Toxic chemical odors are even common with new furniture. These invisible killers are destroying your health day by day. You do need to concern about your health as soon as possible and DFRobot Gravity BME680 environmental sensor can help make an air quality monitor. DFRobot Gravity BME680, take good care of your health!

Applications:

  1. Indoor air quality monitoring
  2. Weather station
  3. Smart home
  4. Internet of Things
  5. Wearable

Useful link:

For more information refer to the tutorial

Features:

  1. MEMS sensor, small size, low power consumption, high reliability
  2. Wide voltage input, compatible with 3.3V and 5V controller
  3. Highly integrated environmental sensor: temperature, humidity, barometer and VOC, four-in-one environmental parameter monitoring
  4. Gravity I2C connector, plug and play, while reserving XH2.54 SPI connector for expansion
  5. Small size and easy to install
  6. Temperature Measurement Precision: ±1.0℃(0~65℃)
  7. Humidity Measurement Range: 0-100%r.H.
  8. Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25℃)
  9. Atmospheric Pressure Measurement Range: 300-1100hPa
  10. Atmospheric Pressure Measurement Precision: ±0.6hPa(300-1100hPa,0~65℃)
  11. IAQ (Indoor Air Quality) Range: 0~500 (the larger the worse)

Package Includes:

1 x Gravity: I2C BME680 Environmental Sensor

1 x XH2.54-6pin Header

1 x Gravity-4P I2C/ UART Sensor Wire

Quick specs

Item Type
Sensor
Model No. / Name
BME680
Voltage Rating
3.3 to 5
Operating Current (mA)
5
Length (mm)
30
Width (mm)
22
See all specifications