
1 / 5 · Click to enlarge
AI Summary
A compact electrochemical oxygen module that reports 0 to 25%Vol ambient O2 over I2C with 0.15%Vol resolution. Its Gravity connector and 3.3 to 5.5V input make it quick to add to Arduino, ESP32 or Raspberry Pi projects.
Key Highlights
- Electrochemical sensing measures ambient oxygen from 0 to 25%Vol
- I2C output with 0.15%Vol resolution for clear concentration readings
- Response time of 15 seconds or less when oxygen levels change
- Accepts 3.3V to 5.5V, suiting both 3.3V and 5V controllers
- Gravity 4-pin interface simplifies wiring and polarity
- Compact 37 x 27 mm board weighing 37 g
Ideal For
- Makers building air quality monitors with Arduino or ESP32
- Raspberry Pi users adding oxygen logging to a project
- Engineers monitoring airflow in warehouses and enclosed spaces
- Students learning about electrochemical gas sensing
- Developers creating portable oxygen concentration devices
Buying Tip
Check that your controller has a free I2C bus and can supply 3.3V to 5.5V, then plan an open-air calibration step before you rely on the readings.
Elecvora expert review
Our verdict
A tidy, well-integrated oxygen module for anyone who wants O2 readings on an I2C bus without building an analog front end. The Gravity connector and wide voltage input make it one of the easier gas sensors to drop into a project.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple I2C wiring with the Gravity connector
- Works with both 3.3V and 5V controllers
- Useful 0.15%Vol resolution across 0 to 25%Vol
- Compact board with mounting hardware included
Cons
- Requires open-air calibration for reliable readings
- Limited to ambient oxygen monitoring, not dissolved oxygen
- Lifetime is finite, so long-term deployments need planning
Best for
Makers and engineers adding ambient oxygen monitoring to Arduino, ESP32 or Raspberry Pi projects
Not ideal for
Applications needing dissolved oxygen measurement or fast-changing high-precision gas analysis
Specifications
| Operating Voltage (V) | 3.3 to 5.5 |
|---|---|
| Operating humidity | 0-100%RH |
| Response Time (uS) | ≤15 seconds |
| Length (mm) | 37 |
| Width (mm) | 27 |
| Weight (g) | 37 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 8 × 5 × 1 cm |
What's in the box
- 1 x Oxygen Sensor module
- 1 x Gravity 4-pin I2C cable
- 4 x M3 x 10 nylon posts
- 8 x M3 x 5 screws
Frequently Asked Questions
What oxygen range does this sensor measure?
Which controllers can I use it with?
What voltage does it need?
Do I need to calibrate it?
What comes in the package?
How should I care for the sensor?
Overview
The DFRobot Gravity I2C Oxygen Sensor is an electrochemical module built to report the oxygen concentration of the surrounding air. It outputs readings over I2C, so a single Gravity 4-pin cable carries both power and data to your controller. The effective measurement range is 0 to 25%Vol with a resolution of 0.15%Vol, which is enough detail for monitoring normal breathing air and detecting changes in enclosed spaces.
The board accepts 3.3V to 5.5V, so it can share a bus with either 3.3V or 5V mainboards. Calibration can be performed in open air, and the module is designed for stability and resistance to interference in everyday monitoring tasks.
Key Features
- Electrochemical oxygen measurement across 0 to 25%Vol
- I2C output with 0.15%Vol resolution
- Response time of 15 seconds or less
- Wide 3.3V to 5.5V operating voltage
- Gravity 4-pin connector with polarity protection
- Compact 37 x 27 mm board, 37 g
Specifications Explained
Range and resolution
A 0 to 25%Vol range covers standard ambient air, where oxygen sits near 21%Vol, and leaves headroom above it. The 0.15%Vol resolution means small shifts in concentration are visible in your data rather than being rounded away.
Response time
A response of 15 seconds or less means the reading tracks changes reasonably quickly, which helps when you move the sensor between areas or ventilate a room.
Voltage and humidity
The 3.3V to 5.5V input removes the need for level shifting on most builds. Operating humidity of 0 to 100%RH covers humid and dry environments alike.
Size and weight
At 37 x 27 mm and 37 g, the module fits into handheld enclosures and small project boxes. Shipping weight is listed at 0.03 kg.
Compatibility and Requirements
The sensor communicates over I2C and is compatible with mainboards such as Arduino Uno, ESP32 and Raspberry Pi. You need a controller with an I2C bus, the supplied Gravity cable, and a suitable power source within the 3.3V to 5.5V range. Sample code and documentation are available from the manufacturer to help you get started.
Typical Uses
- Portable oxygen concentration monitors
- Air quality monitoring devices
- Industrial, mining and warehouse spaces with limited airflow
- Educational and prototype projects on Arduino, ESP32 or Raspberry Pi
What's in the Box
- 1 x Oxygen Sensor module
- 1 x Gravity 4-pin I2C cable
- 4 x M3 x 10 nylon posts
- 8 x M3 x 5 screws

Quick specs
- Operating Voltage (V)
- 3.3 to 5.5
- Operating humidity
- 0-100%RH
- Response Time (uS)
- ≤15 seconds
- Length (mm)
- 37
- Width (mm)
- 27
- Weight (g)
- 37


















