Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.08 kg.

Key Highlights

  • Shipping Weight: 0.08 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.08 kg
Shipping Dimensions15 × 10 × 5 cm

Overview

The DFRobot Gravity I2C High Temperature Sensor (K-Type, 800°C), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.08 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 15 × 10 × 5 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

PT100 is suitable for most of the temperature measurement below 400°C, but usually the temperature of the household natural gas stove can reach over 800°C, and the temperature of the pottery kiln or high-power electric furnace can be more than 1000°C. The K-type thermocouple are commonly used in such ultra-high temperature scenes. The digital K-type high temperature sensor consists of a signal amplification conversion module and a stainless steel sheathed K-type thermocouple probe. When the K-type thermocouple probe is placed near a high-temperature heat source, the probe generates a small voltage proportional to the temperature due to the thermoelectric effect. The module uses a MAX31855K dedicated chip to amplify this small voltage, convert it to digital signals, and compensate accordingly. The temperature readings can be read through Gravity I2C interface. The module can measure extremely wide temperature ranging from -270°C to 1372°C, the error from -200°C to 700°C is within ±2°C, and the error from 700°C to 1350°C is within ±4°C. The attached K-type thermocouple can measure up to 800 °C with error within ± 2.5 °C.


Features:

  1. 14 bit, 0.25°C digital high-resolution temperature measurement.
  2. Extremely wide temperature range.
  3. Wide input voltage, compatible with 3.3V and 5V controllers.
  4. Gravity I2C interface, convenient connection.
  5. Fits any K-type thermocouple probe.

Specifications:

Signal Amplification Conversion Module

  1. Input Voltage (VCC): 3.3V~5.5V.
  2. Probe: K Type Thermocouple.
  3. Temperature Range: -270°C~1372°C.
  4. Resolution: 0.25 °C.
  5. Error: within ≤ ±2°C(-200°C~700°C) ~ ±4°C(700°C~1350°C).
  6. Interfaces: Gravity I2C (Logic Level 0-3.3V).
  7. Dimension: 44.0mm*22.0mm.

Armored K-Type Thermocouple Probe

  1. Temperature Range: up to 800 °C.
  2. Error: ≤ ±2.5°C.
  3. Wire Length: 1.5m.
  4. Probe Length: 50mm.
  5. Probe Diameter: Φ4mm.
  6. Features: Waterproof, Corrosion Resistant (Weak Acid or Alkali Resistant, Rustproof), High Temperature Resistance.

Applications:

  1. Electric Oven, Electric Furnace.
  2. High Temperature Flame, Gas.
  3. Pottery Kiln.

Packages Includes:

1 x DFRobot Gravity I2C High Temperature Sensor (K-Type, 800℃).

Quick specs

Shipping Weight
0.08 kg
Shipping Dimensions
15 × 10 × 5 cm
See all specifications