
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (vdc) 3.3 to 5.5; working current (ma) <2; communication mode I2C. Check that your power source supplies 3.3 to 5.5 before connecting it.
Key Highlights
- Operating Voltage (VDC): 3.3 to 5.5
- Working Current (mA): <2
- Communication Mode: I2C
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Operating Voltage (VDC) | 3.3 to 5.5 |
|---|---|
| Working Current (mA) | <2 |
| Communication Mode | I2C |
| I2C Address | 0x63 |
| Operating Temperature (°C) | -40 to 85 |
| Dimensions (L x W x H) mm | 30 x 22 |
| Shipping Weight | 20 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
Overview
The DFRobot Gravity ICP-10111 Pressure Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Operating Voltage (VDC): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
- Working Current (mA): <2 (your supply must deliver at least this much current)
- Communication Mode: I2C
- I2C Address: 0x63
- Operating Temperature (°C): -40 to 85
- Dimensions (L x W x H) mm: 30 x 22 (measure your mounting space before ordering)
- Shipping Weight: 20 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 5 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This barometric pressure temperature sensor is equipped with TDK's newly launched ICP-10111 barometric pressure sensor, which is based on MEMS capacitor technology to achieve ultra-low power consumption, industry-leading relative accuracy, and temperature offset coefficient. The Gravity: ICP-10111 barometric pressure temperature sensor can measure the pressure difference with an accuracy of ±1Pa, an accuracy enabling altitude measurement differentials as small as 8.5 cm, less than the height of a single stair step. The pressure noise can be as low as 0.4Pa, and the read data will be more stable. There is a built-in temperature sensor for air pressure compensation. The ICP-10111 offers a temperature coefficient offset of ±0.5 Pa/°C, more stable for long-term use. The combination of high accuracy, low power, and temperature stability in a small footprint enables higher-performance barometric pressure sensing for sports activity identification, mobile indoor/outdoor navigation, and altitude-hold in drones. Applications:
- UAV height control
- Indoor navigation and positioning
- Vertical speed measurement
- Enhancing reality and virtual display applications
Features:
- Relative accuracy ±1Pa, as small as 8.5cm height measurement difference.
- ±0.5Pa/℃ temperature coefficient offset, high stability for long-term use.
- 0.4Pa Pressure noise, more stable data.
- Barometric Pressure Measurement Range: 30~110kPa.
- Relative Barometric Pressure Measurement Accuracy: ±0.01 hPa (950hPa~1050hPa, 25℃).
- Absolute Barometric Pressure Measurement Accuracy: ±1 hPa (950hPa-1050hPa, 0℃~65℃).
- Temperature Coefficient Offset: ±0.5 Pa/℃ (100kPa, 25℃~45℃).
- Absolute Temperature Measurement Accuracy: ±0.4℃.
Packages Includes:
1 x DF Robot Gravity ICP-10111 Pressure Sensor.
Quick specs
- Operating Voltage (VDC)
- 3.3 to 5.5
- Working Current (mA)
- <2
- Communication Mode
- I2C
- I2C Address
- 0x63
- Operating Temperature (°C)
- -40 to 85
- Dimensions (L x W x H) mm
- 30 x 22


















