
1 / 4 · Click to enlarge
AI Summary
This DFRobot kit measures dissolved oxygen in water using a galvanic probe compatible with Arduino. It offers fast response, replaceable membrane cap, and wide voltage support for easy water quality monitoring.
Key Highlights
- Galvanic probe requires no polarization time
- Replaceable filling solution and membrane cap
- Wide 3.3-5.5V power supply for most Arduino boards
- 0-3.0V analog output works with ADC-enabled microcontrollers
- Gravity interface for plug-and-play connectivity
- 2-meter cable with BNC connector for flexible placement
Ideal For
- Aquaculture enthusiasts monitoring fish tank water quality
- Environmental science students and researchers
- Makers building DIY water quality sensors with Arduino
- Educators teaching sensor technology and water quality
Buying Tip
Remember that the electrode has a service life of about 1 year under normal use, so consider ordering a spare membrane cap and filling solution if you plan long-term monitoring.
Elecvora expert review
Our verdict
The DFRobot Gravity Lab Grade Analog Dissolved Oxygen Sensor Meter Kit is a practical and accessible tool for anyone needing to measure dissolved oxygen with Arduino. Its galvanic probe and replaceable components make it low-maintenance, while the wide voltage range and Gravity interface ensure easy integration.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- No polarization time needed with galvanic probe
- Replaceable membrane cap and filling solution reduce long-term costs
- Wide 3.3-5.5V compatibility with most Arduino boards
- Plug-and-play Gravity interface simplifies wiring
- Fast response time (98% within 90 seconds)
Cons
- Electrode service life is limited to about 1 year under normal use
- Requires a separate microcontroller and power source (not included)
- Calibration may be needed for accurate measurements
Best for
Makers and educators building water quality monitoring projects with Arduino
Not ideal for
Those needing a standalone meter without a microcontroller or long-term deployment without maintenance
Specifications
| Operating Voltage (V) | 3.3 to 5.5 |
|---|---|
| Pressure Range (MPa) | 0~50PSI |
| Response Time(s) | Up to 98% full response, within 90 seconds (25℃) |
| Service life | Electrode Service life: 1 year (normal use) |
| Cable Length | 2 Meter |
| Probe Connector | BNC |
| Signal Output | 0~3.0V |
| Connector Type | BNC |
| Shipping Weight | 0.267 kg |
| Shipping Dimensions | 33 × 12 × 8 cm |
What's in the box
- 1 x Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
Frequently Asked Questions
What is the operating voltage of this sensor kit?
Does the probe require polarization time?
What is the output signal of the sensor?
Is the membrane cap replaceable?
What is included in the package?
How long does the electrode last?
Overview
The DFRobot Gravity Lab Grade Analog Dissolved Oxygen Sensor Meter Kit is designed for makers, students, and professionals who need to measure dissolved oxygen in water. Dissolved oxygen is a key indicator of water quality, and this kit helps you quickly build your own dissolved oxygen detector. Whether you are monitoring aquaculture systems, conducting environmental research, or exploring natural science projects, this sensor kit provides a reliable and accessible solution.
The kit is compatible with Arduino microcontrollers and features a galvanic probe that does not require polarization time, so you can start measuring sooner. The filling solution and membrane cap are replaceable, reducing maintenance costs and extending the life of the probe.
Key Features
- Galvanic probe: No polarization time needed, ready to use quickly.
- Replaceable components: Filling solution and membrane cap can be replaced, lowering long-term maintenance costs.
- Wide power supply: Operates from 3.3V to 5.5V, compatible with most Arduino microcontrollers.
- Analog output: 0~3.0V signal output works with any microcontroller that has an ADC.
- Gravity interface: Plug-and-play connection for easy setup.
- Long cable: 2-meter cable with BNC connector allows flexible probe placement.
Specifications Explained
Operating voltage (3.3 to 5.5V): This wide range means the kit can be powered from common Arduino boards and other microcontrollers without additional voltage regulation.
Pressure range (0~50PSI): The sensor can operate in environments with pressures up to 50 PSI, suitable for typical water quality applications.
Response time: The sensor reaches up to 98% of full response within 90 seconds at 25°C, providing timely readings for most monitoring needs.
Service life: The electrode has a service life of 1 year under normal use, and with replaceable membrane cap and solution, maintenance is straightforward.
Signal output (0~3.0V): The analog voltage output is proportional to dissolved oxygen concentration and can be read by any microcontroller with an ADC.
Probe connector (BNC): The BNC connector ensures a secure and stable connection between the probe and the interface board.
Compatibility and Requirements
The kit is compatible with Arduino microcontrollers and other microcontrollers that have an ADC (analog-to-digital converter) and can accept a 0~3.0V analog input. The Gravity interface simplifies wiring. Power supply must be within 3.3 to 5.5V. Note that the kit requires a microcontroller (not included) to read the sensor data.
Typical Uses
- Aquaculture: monitor dissolved oxygen levels in fish tanks or ponds to ensure healthy aquatic life.
- Environmental monitoring: measure water quality in rivers, lakes, or other natural water bodies.
- Natural science education: hands-on projects for learning about water quality and sensor technology.
- DIY water quality detectors: build custom monitoring systems with Arduino.
What's in the Box
1 x Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino

Quick specs
- Operating Voltage (V)
- 3.3 to 5.5
- Pressure Range (MPa)
- 0~50PSI
- Response Time(s)
- Up to 98% full response, within 90 seconds (25℃)
- Service life
- Electrode Service life: 1 year (normal use)
- Cable Length
- 2 Meter
- Probe Connector
- BNC


















