
1 / 5 · Click to enlarge
AI Summary
The DFRobot Gravity Liquid Flow Sensor G1/2 measures flow rates from 30 to 1200 L/H for low-viscosity liquids and outputs an NPN pulse signal. Its Gravity interface and wide 3.5–24 VDC input make it easy to connect directly to Arduino or Raspberry Pi.
Key Highlights
- Measures flow rates from 30 to 1200 L/H
- Wide operating voltage range of 3.5 to 24 VDC
- NPN pulse output with 50%±10% duty ratio
- G1/2 pipe thread for inline installation
- Gravity interface simplifies wiring to microcontrollers
- O-ring seal and silicone sealant for waterproofness
Ideal For
- Makers building Arduino-based flow monitoring projects
- Engineers integrating liquid flow measurement in industrial systems
- Hydroponics and irrigation enthusiasts
- Automotive and engine test rig builders
- Educators teaching sensor interfacing
Buying Tip
Ensure your liquid is free of impurities and compatible with the wetted materials, and verify that your expected flow rate falls within the 30–1200 L/H range.
Elecvora expert review
Our verdict
The DFRobot Gravity Liquid Flow Sensor G1/2 offers a wide flow range and flexible voltage input in a robust, easy-to-interface package. It is a solid choice for makers and engineers who need reliable liquid flow measurement without complex setup.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide flow range of 30–1200 L/H
- Flexible 3.5–24 VDC operating voltage
- Simple Gravity interface for microcontrollers
- Good waterproofing with O-ring and sealant
- High immunity to electromagnetic interference and vibration
Cons
- Requires liquid free of impurities
- Limited to low-viscosity liquids
- No additional cable or accessories included
Best for
Arduino and Raspberry Pi users measuring flow of clean, low-viscosity liquids
Not ideal for
Applications with dirty, particulate-laden, or high-viscosity fluids
Specifications
| Working water pressure(MPa) | ≤1.2 |
|---|---|
| Operating Voltage (VDC) | 3.5 to 24 |
| Operating Current (mA) | ≤10mA (DC5V) |
| Output Type | NPN pulse signal |
| Pipe Diameter | G1/2 |
| Thread Diameter (mm) | Inner: 10mm, Outer: 20.5mm |
| Thread Length | 29mm |
| Flow Rate (L/H) | 30-1200L/H |
| Operating Temperature (°C) | ≤80°C |
| Operating humidity | 35%~90%RH (No condensing) |
| Storage Temperature (°C) | -25°~+80°C |
| Storage Humidity | 25%~95%RH |
| Additional Specs. | Output Pulse High Level: >DC4.7V (input voltage DC5V), Output Pulse Low Level: <DC0.5V (input voltage DC5V), Output Pulse Duty Ratio: 50%±10% |
| Insulation Resistance (Ohm) | >100MΩ |
| Shipping Weight | 0.123 kg |
| Shipping Dimensions | 9 × 7 × 4 cm |
What's in the box
- 1 x DFRobot Gravity Liquid Flow Sensor (G1/2)
Frequently Asked Questions
What liquids can this sensor measure?
Can I connect it directly to an Arduino?
What is the power requirement?
What is included in the package?
How do I maintain the sensor?
What is the output signal?
Overview
The DFRobot Gravity Liquid Flow Sensor G1/2 is an electromagnetic flow sensor for measuring the flow rate of high-concentration, low-viscosity liquids. It is designed to be installed directly in a liquid line and provides a digital pulse output that is easy to read with a microcontroller. The sensor works with liquids such as water, diesel, engine oil, milk, paint, detergent, and honey, as long as the liquid contains no impurities. Its Gravity interface and wide voltage range make it a practical building block for flow monitoring projects.
Key Features
- Wide flow range: Measures from 30 to 1200 L/H, suitable for many low-viscosity liquids.
- Flexible power input: Operates from 3.5 to 24 VDC, with a current draw of ≤10 mA at 5 VDC.
- Digital output: NPN pulse signal with a duty ratio of 50%±10%, directly readable by microcontrollers.
- Gravity interface: Simplifies connection to Arduino, Raspberry Pi, and similar boards without extra circuits.
- Durable sealing: O-ring rubber seal and silicone sealant at the outlet end ensure good waterproofness.
- Reliable performance: High anti-electromagnetic interference and anti-vibration capabilities.
Specifications Explained
Flow rate (30–1200 L/H): This is the range over which the sensor provides meaningful pulse output. Flows outside this range may not be measured accurately.
Operating voltage (3.5–24 VDC): The sensor can be powered from a wide range of DC supplies, making it compatible with common microcontroller boards and industrial systems. Current consumption is ≤10 mA at 5 VDC.
Output type (NPN pulse): The sensor outputs a square-wave pulse whose frequency corresponds to flow rate. At 5 VDC input, the high level is >4.7 V and the low level is <0.5 V, with a duty ratio of 50%±10%.
Pipe diameter (G1/2): The G1/2 thread has an inner diameter of 10 mm, outer diameter of 20.5 mm, and thread length of 29 mm, allowing inline installation in compatible plumbing.
Environmental limits: Operating temperature up to 80°C, operating humidity 35–90%RH (non-condensing), storage temperature -25 to +80°C, and storage humidity 25–95%RH. Insulation resistance is >100 MΩ.
Compatibility and Requirements
The sensor can be connected to microcontrollers such as Arduino UNO and Raspberry Pi. It requires no extra circuit for basic flow measurement. The liquid must be free of impurities to avoid blocking or damaging the internal pinwheel. The sensor must be installed in the liquid line whose flow is to be measured.
Typical Uses
- Monitoring water flow in irrigation or hydroponics systems
- Measuring diesel or engine oil flow in automotive or industrial setups
- Dispensing detergents, paints, or other low-viscosity liquids
- Educational projects and prototyping with Arduino or Raspberry Pi
- Flow verification in small-scale process control
What's in the Box
- 1 x DFRobot Gravity Liquid Flow Sensor (G1/2)
Quick specs
- Working water pressure(MPa)
- ≤1.2
- Operating Voltage (VDC)
- 3.5 to 24
- Operating Current (mA)
- ≤10mA (DC5V)
- Output Type
- NPN pulse signal
- Pipe Diameter
- G1/2
- Thread Diameter (mm)
- Inner: 10mm, Outer: 20.5mm


















