
1 / 4 · Click to enlarge
AI Summary
A Gravity-format MAX30102 module with an onboard MCU that outputs processed heart rate and blood oxygen values over I2C or UART. It runs on 3.3V or 5V and includes PC host software for direct data viewing.
Key Highlights
- MAX30102 optical sensor paired with an onboard algorithm microcontroller
- Processed heart rate and oximetry values instead of raw PPG data
- Selectable I2C or UART output for flexible integration
- Wide 3.3V to 5V supply with current draw under 15mA
- Host computer software for reading data on a PC
- Gravity connector format for quick wiring to common boards
Ideal For
- Makers building heart rate and blood oxygen learning projects
- Students exploring PPG optical sensing with Arduino or Raspberry Pi
- Engineers prototyping home oximeter devices
- Developers logging pulse and oxygen data over long periods
- Educators demonstrating sensor-to-PC data pipelines
Buying Tip
Plan a gentle finger fixture for your build, since direct pressure on the sensor changes the readings.
Elecvora expert review
Our verdict
This is a well-considered module for anyone who wants pulse and oxygen values without writing their own signal-processing code. The onboard algorithm and dual interface options make it a fast route from wiring to usable data.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Processed heart rate and oximetry output saves development time
- I2C and UART options fit different host boards
- 3.3V and 5V compatibility simplifies power
- Host computer software helps with quick validation
Cons
- Readings are sensitive to finger pressure and placement
- Not a certified medical device, so clinical use is excluded
Best for
Makers and students building pulse and blood oxygen monitoring projects
Not ideal for
Medical diagnosis or any clinical measurement use
Specifications
| Power Supply Voltage (V) | 3.3V/5V |
|---|---|
| Working Current (mA) | <15mA |
| Communication Mode | I2C/UART |
| I2C Address | 0x57 |
| Serial Baud Rate | 9600 |
| Operating Temperature (°C) | -40℃~85℃ |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 6 × 2 cm |
What's in the box
- 1 x DFRobot Gravity MAX30102 Heart Rate and Oximeter Sensor
Frequently Asked Questions
Does this module output raw sensor data or finished values?
Which voltage should I use to power it?
How do I connect it to a controller?
Why do my readings change when I press on the sensor?
Can I view the data on a computer?
Is this a medical device?
Overview
The DFRobot Gravity MAX30102 Heart Rate and Oximeter Sensor combines the Maxim MAX30102 optical sensing chip with a microcontroller that runs heart rate and blood oxygen algorithms. The sensor collects photoplethysmography (PPG) data from a fingertip, and the onboard MCU converts it into usable pulse and oximetry values. Those values are then sent to your host board over I2C or UART, so your main controller does not need to run the signal processing itself.
This makes the module a practical building block for pulse and oxygen monitoring projects, from classroom demonstrations to home oximeter prototypes and long-term logging setups. A companion host computer application is provided so you can read the output on a PC without writing a full display application first.
Key Features
- MAX30102 sensor with integrated heart rate and oximetry algorithm on an onboard MCU
- Outputs processed values rather than raw optical samples, reducing load on the main controller
- I2C interface at address 0x57 or UART at 9600 baud
- Accepts 3.3V or 5V supply and draws less than 15mA
- Host computer software included for convenient PC-side data reading
- Gravity connector style for simple cable runs to development boards
Specifications Explained
Power supply: The module accepts either 3.3V or 5V, so it can share a rail with most common development boards without an extra regulator. Current draw stays below 15mA, which is light enough for USB-powered setups.
Communication: You can choose I2C at address 0x57 or UART at 9600 baud. I2C suits boards that already have a sensor bus, while UART is handy when you want a simple serial stream or when the I2C bus is crowded.
Temperature range: Operation is rated from -40°C to 85°C, covering indoor use and most outdoor or enclosure-based projects.
Physical size: Shipping dimensions of 6 × 6 × 2 cm and a shipping weight of 0.02 kg describe a compact, light module that is easy to mount on a finger fixture or enclosure.
Compatibility and Requirements
The module works with controllers that support I2C or UART at the stated settings. DFRobot documents connection examples for the DFRduino UNO R3 and Raspberry Pi, and the product wiki provides wiring and code guidance. You will need a host board, a suitable Gravity or jumper cable, and a stable power source within the 3.3V to 5V range. For PC-side viewing, use the provided host computer software.
Typical Uses
- Heart rate and blood oxygen learning projects
- Home oximeter prototypes and experiments
- Long-term heart rate and blood oxygen monitoring setups
- Classroom and maker demonstrations of PPG sensing
Measurement Notes
Finger pressure affects the optical reading. Pressing directly on the sensor can change the output, so fix the sensor gently against the finger instead of pushing down. The wearing direction does not matter. This product is not a professional medical instrument and must not be used as an accessory in diagnosis or treatment.
What's in the Box
- 1 x DFRobot Gravity MAX30102 Heart Rate and Oximeter Sensor



Quick specs
- Power Supply Voltage (V)
- 3.3V/5V
- Working Current (mA)
- <15mA
- Communication Mode
- I2C/UART
- I2C Address
- 0x57
- Serial Baud Rate
- 9600
- Operating Temperature (°C)
- -40℃~85℃


















