Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact MiCS-4514 gas sensor board with I2C output that measures CO, alcohol, NO2, NH3, H2 and methane concentrations. It runs from 3.3 to 5.5 V and includes conversion formulas so raw readings become usable ppm values.

Key Highlights

  • MiCS-4514 MEMS sensing element covers six target gases on one board
  • I2C digital output simplifies wiring to mainstream controllers
  • Wide 3.3 to 5.5 V input needs no external level shifter
  • Low 0.45 W power draw suits portable and enclosed builds
  • Compact 37 x 27 x 6 mm board with 3.1 mm mounting holes
  • Includes Gravity 4-pin I2C cable for quick connection

Ideal For

  • Makers building gas leak detection prototypes
  • Students learning about MEMS gas sensors and I2C
  • Engineers developing air quality monitoring devices
  • Developers adding multi-gas sensing to Arduino or ESP32 projects
  • Lab users needing a compact gas sensing breakout

Buying Tip

Check the per-gas measurement ranges before you buy, since nitrogen dioxide is only detectable from 0.05 to 10 ppm while carbon monoxide and hydrogen reach 1000 ppm.

Elecvora expert review

Our verdict

A tidy, well-integrated gas sensing board that removes most of the wiring friction from multi-gas projects. The supplied conversion formulas and wide voltage input make it a practical starting point for air monitoring prototypes.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Six target gases on a single board
  • I2C output keeps wiring simple
  • 3.3 to 5.5 V input suits most controllers
  • Conversion formulas are provided by the maker
  • Compact board with clear mounting holes

Cons

  • Different gases have very different detection ranges
  • Methane is only specified as above 1000 ppm
  • Requires warm-up and baseline calibration for reliable readings

Best for

Makers and engineers prototyping multi-gas detection and air monitoring

Not ideal for

Applications needing certified safety-grade gas measurement

Specifications

Operating Voltage (V)3.3 to 5.5
Power Consumption (W)0.45
Communication ModeI2C
Measurement Range1 – 1000ppm (Carbon monoxide CO) 0.05 – 10ppm (Nitrogen dioxide NO2) 10 – 500ppm (Ethanol C2H5OH) 1 – 1000ppm (Hydrogen H2) 1 – 500ppm (Ammonia NH3) >1000ppm (Methane CH4)
Operating Temperature (°C)-30~85
Mounting Hole Diameter (mm)ID:3.1, OD:6
Dimensions (L x W x H) mm37x27x6
Weight (g)10
Shipping Weight0.02 kg
Shipping Dimensions6 × 5.5 × 2.5 cm

What's in the box

  • 1 x Gravity MEMS CO, Alcohol, NO2 and NH3 Gas Sensor
  • 1 x Gravity 4-pin I2C cable

Frequently Asked Questions

Which gases can this sensor detect?
It reports carbon monoxide, nitrogen dioxide, ethanol, hydrogen, ammonia and methane. Each gas has its own measurement range listed in the specifications.
Which controllers does it work with?
Any controller with an I2C bus and a 3.3 to 5.5 V supply, such as Arduino, ESP32 or Raspberry Pi boards. The included Gravity 4-pin I2C cable handles the connection.
What voltage does the board need?
It accepts 3.3 to 5.5 V and draws about 0.45 W. That range covers both 3.3 V and 5 V logic systems without an extra level shifter.
Do I need to write my own conversion code?
No, DFRobot provides conversion formulas for the various gas concentrations. You still need to apply them in your own sketch and calibrate a baseline.
What comes in the package?
You receive one Gravity MEMS CO, Alcohol, NO2 and NH3 Gas Sensor and one Gravity 4-pin I2C cable.
How should I care for the sensor?
Keep it within the -30 to 85 °C operating range, avoid exposing it to vapours beyond the listed ranges, and let it warm up in clean air before taking readings.

Overview

The DFRobot Gravity MEMS Gas Sensor is a small breakout built around the MiCS-4514 sensing element. It puts multi-gas detection onto a single board and exposes readings over I2C, so you can add gas monitoring to a project with two signal wires rather than a bundle of analog connections. DFRobot also provides conversion formulas for the different gases, which shortens the path from raw sensor output to meaningful concentration values.

Key Features

  • Multi-gas sensing: one board reports carbon monoxide, nitrogen dioxide, ethanol, hydrogen, ammonia and methane.
  • I2C interface: a digital bus that keeps wiring simple and leaves analog pins free.
  • Flexible supply: accepts 3.3 to 5.5 V, matching both 3.3 V and 5 V controllers.
  • Low power: 0.45 W consumption is modest for a heated MEMS gas sensor.
  • Compact format: 37 x 27 x 6 mm with 3.1 mm inner diameter mounting holes.

Specifications Explained

The headline figure is the measurement range, which differs by gas. Carbon monoxide spans 1 to 1000 ppm, nitrogen dioxide a much narrower 0.05 to 10 ppm, ethanol 10 to 500 ppm, hydrogen 1 to 1000 ppm and ammonia 1 to 500 ppm, while methane is listed above 1000 ppm. This tells you the board is not equally sensitive to every gas, so plan your thresholds around the listed ranges rather than assuming one uniform scale.

The operating temperature range of -30 to 85 °C covers indoor and most sheltered outdoor use. Power draw of 0.45 W means the board warms slightly in use, which is normal for this sensor type. The 3.1 mm inner and 6 mm outer mounting hole dimensions make it easy to fix to a panel or enclosure.

Compatibility and Requirements

The board works with any master controller that supports I2C and can supply between 3.3 and 5.5 V, including Arduino, ESP32 and Raspberry Pi class boards. You need a free I2C bus and the supplied Gravity 4-pin I2C cable to connect it. No analog input is required.

Typical Uses

  • Gas leak detection prototypes
  • Gas safety equipment development
  • Air environment detection and logging
  • Educational and laboratory gas sensing experiments

What's in the Box

One Gravity MEMS CO, Alcohol, NO2 and NH3 Gas Sensor and one Gravity 4-pin I2C cable.

Quick specs

Operating Voltage (V)
3.3 to 5.5
Power Consumption (W)
0.45
Communication Mode
I2C
Measurement Range
1 – 1000ppm (Carbon monoxide CO) 0.05 – 10ppm (Nitrogen dioxide NO2) 10 – 500ppm (Ethanol C2H5OH) 1 – 1000ppm (Hydrogen H2) 1 – 500ppm (Ammonia NH3) >1000ppm (Methane CH4)
Operating Temperature (°C)
-30~85
Mounting Hole Diameter (mm)
ID:3.1, OD:6
See all specifications