Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: operating voltage (v) 3.3 to 5.5; detection gas ozone (O3); working current (ma) <5mA. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Operating Voltage (V): 3.3 to 5.5
  • Detection Gas: ozone (O3)
  • Working Current (mA): <5mA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Operating Voltage (V)3.3 to 5.5
Detection Gasozone (O3)
Working Current (mA)<5mA
Signal OutputI2C, UART (0~3V), analog voltage
CompatibilityArduino, ESP32, Raspberry pi
Life Cycle>2 years (in the air)
Operating Temperature (°C)-20 to 50
Shipping Weight0.081 kg
Shipping Dimensions13 × 9 × 4 cm

Overview

The DFRobot Gravity O3 Sensor Calibrated I2C UART, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Detection Gas: ozone (O3)
  • Working Current (mA): <5mA (your supply must deliver at least this much current)
  • Signal Output: I2C, UART (0~3V), analog voltage (match this to your power supply; too high a voltage can damage the part)
  • Compatibility: Arduino, ESP32, Raspberry pi
  • Life Cycle: >2 years (in the air)
  • Operating Temperature (°C): -20 to 50
  • Shipping Weight: 0.081 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a sensor that detects ozone concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ozone in the environment. Can be widely used in industrial and environmental protection fields for ozone detection. The probe adopts the electrochemical principle, has the characteristics of strong anti-interference ability, high stability, high sensitivity, etc., and the service life is as long as two years. The sensor has 32 modifiable I2C addresses, an integrated temperature compensation algorithm, and a threshold alarm function, It has good compatibility with mainstream main control devices such as Arduino, ESP32, and raspberry pi. The easy-to-use Gravity interface, coupled with our sample code, can quickly build an ozone concentration detector.DFRobot has introduced 12 gas detection sensors in this series, CO, O2, NH3, H2S, NO2, HCL, H2, PH3, SO2, O3, CL2, and HF, which are used in exactly the same way and data format, so you can combine them according to your needs.


Connection Diagram:


Useful link:

Library- https://github.com/DFRobot/DFRobot_MultiGasSensor https://wiki.dfrobot.com/SKU_SEN0465toSEN0476_Gravity_Gas_Sensor_Calibrated_I2C_UART


Features:

  1. Strong anti-interference ability
  2. High stability
  3. High sensitivity
  4. Easy to use
  5. Plug and play device
  6. Low power consumption

Package Includes:

1 x DFRobot Gravity O3 Sensor (Calibrated) - I2C & UART

Quick specs

Operating Voltage (V)
3.3 to 5.5
Detection Gas
ozone (O3)
Working Current (mA)
<5mA
Signal Output
I2C, UART (0~3V), analog voltage
Compatibility
Arduino, ESP32, Raspberry pi
Life Cycle
>2 years (in the air)
See all specifications