Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name DAQ Module; operating voltage (v) 3.3 to 5.5; operating current (ma) 40mA. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Model No. / Name: DAQ Module
  • Operating Voltage (V): 3.3 to 5.5
  • Operating Current (mA): 40mA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameDAQ Module
Operating Voltage (V)3.3 to 5.5
Operating Current (mA)40mA
Signal OutputI2C (0x21-0x23)
Input Interface1 x Digital/Analog, 2 x I2C/UART
Onboard Storage16M
RTC batteryCR1220
Additional Specs.Screen Info: 1.3 inches OLED
Dimensions (L x W x H) mm62×52×13mm/2.44×2.05×0.51"
Shipping Weight0.15 kg
Shipping Dimensions11 × 9 × 3 cm

Overview

The DFRobot Gravity: SCI DAQ Module with Screen (I2C), made by DFRobot, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: DAQ Module
  • Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Operating Current (mA): 40mA (your supply must deliver at least this much current)
  • Signal Output: I2C (0x21-0x23)
  • Input Interface: 1 x Digital/Analog, 2 x I2C/UART (confirm your cable or board uses the same connector)
  • Onboard Storage: 16M (space for firmware, files or media)
  • RTC battery: CR1220 (note the battery type so you can order spares or the right charger)
  • Additional Specs.: Screen Info: 1.3 inches OLED

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

DFRobot has provided users with hundreds of sensors of all kinds. However, many of them output raw electrical signals like current, voltage, etc., and to obtain data in standard units of physical quantities, users need to look for relevant information in the product datasheets and convert data by formulas or coding. Meanwhile, the data format varies with different sensors, so each sensor requires a specific control program to be written. These would raise the bar for using sensors. Therefore, DFRobot develops this Gravity: SCI DAQ module that allows users to get sensor data in a simpler way. The Gravity: SCI DAQ Module is a powerful and highly integrated data acquisition module that incorporates features such as screen display, automatic sensor recognition, sensor calibration, data storage, RTC clock, and data conversion to make data acquisition more convenient and efficient. In addition, the SCI DAQ module has versatile power options and can output physical quantity data collected by sensors through an I2C interface, Compatible with micro: bit, Arduino, Raspberry Pi, UNIHIKER, etc.
Applications:
  1. Scientific exploration: Improve the efficiency and accuracy of scientific exploration
  2. Interdisciplinary teaching: Allow teachers and students to easily complete interdisciplinary teaching, enrich teaching content, and improve teaching quality
  3. Agriculture and environmental monitoring: Collaborate with various environmental sensors for use in agriculture, water quality monitoring, meteorological observation, and other fields
  4. IoT applications: Function as a data acquisition module for IoT devices to achieve remote data transmission and control.

Features:

  1. Screen Display: The SCI DAQ Module has a built-in screen that can display real-time sensor data, making it easier for users to observe.
  2. Plug-and-play: The SCI DAQ Module can automatically recognize the type of I2C sensor connected, eliminating the need for manual settings and improving ease of use.
  3. Support Sensor Calibration: The SCI DAQ module can perform sensor calibration on the board. Sensors such as PH and TDS that require calibration before use can be quickly calibrated on the SCI acquisition module, ensuring data accuracy and reliability.
  4. Data Storage: The SCI DAQ Module has 16M of onboard storage, capable of storing more than 400,000 pieces of data. The stored data can be exported to a computer via a Type-C interface, making it convenient for users to analyze and process data.
  5. RTC Clock: The SCI DAQ Module has a high-precision real-time clock (RTC) that can record the time stamp for each data acquisition. This helps users easily track data trends and quickly perform data analysis and processing.

Package Includes:

1 x Gravity: SCI DAQ Module

1 x Double-headed PH2.0-4P Cable 20cm

1 x Double-headed PH2.0-3P Cable 20cm

1 x Gravity-4P I2C/UART Sensor Cable

Quick specs

Model No. / Name
DAQ Module
Operating Voltage (V)
3.3 to 5.5
Operating Current (mA)
40mA
Signal Output
I2C (0x21-0x23)
Input Interface
1 x Digital/Analog, 2 x I2C/UART
Onboard Storage
16M
See all specifications