
1 / 4 · Click to enlarge
At a glance
Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: rated voltage (vdc) 3.3 to 5; signal voltage 0~4.5v(@5v) or 0~3.0v(@3.3v); length (mm) 30. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Rated Voltage (VDC): 3.3 to 5
- Signal voltage: 0~4.5v(@5v) or 0~3.0v(@3.3v)
- Length (mm): 30
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Rated Voltage (VDC) | 3.3 to 5 |
|---|---|
| Signal voltage | 0~4.5v(@5v) or 0~3.0v(@3.3v) |
| Length (mm) | 30 |
| Width (mm) | 20 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
Overview
The DFRobot Gravity Steam Sensor, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Rated Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- Signal voltage: 0~4.5v(@5v) or 0~3.0v(@3.3v) (match this to your power supply; too high a voltage can damage the part)
- Length (mm): 30 (measure your mounting space before ordering)
- Width (mm): 20 (measure your mounting space before ordering)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.
Connection Diagram:
Useful Link:
For more information refer to link
Application:
- Simple rain detector
- Cheap steam level switch
- Touch sensor based on humidity
Package Includes:
1 x DFRobot Gravity Steam Sensor
Quick specs
- Rated Voltage (VDC)
- 3.3 to 5
- Signal voltage
- 0~4.5v(@5v) or 0~3.0v(@3.3v)
- Length (mm)
- 30
- Width (mm)
- 20
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 6 × 4 × 2 cm



















