Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An analog ultrasonic distance sensor with 30Hz ranging, temperature compensation and a 2–500cm range. It gives Arduino and Raspberry Pi projects fast, stable obstacle detection through a simple Gravity connector.

Key Highlights

  • 30Hz measurement frequency for fast, repeated distance readings
  • 2cm to 500cm range with 1cm resolution and 1% accuracy
  • Built-in temperature compensation for steadier results
  • Analog output read directly by 3.3V or 5V logic boards
  • Compact 47mm x 22mm board with Gravity PH2.0-3P connector
  • Wide 3.3–5.5V DC supply and -10 to 70°C operating range

Ideal For

  • Makers building Arduino or Raspberry Pi distance-sensing projects
  • Robotics students learning ultrasonic ranging and obstacle avoidance
  • Small robot and rover builders needing fast proximity detection
  • Educators demonstrating analog sensor output and echo timing
  • Hobbyists adding proximity sensing to interactive installations

Buying Tip

Check that your controller has a free analog input and can supply 3.3–5.5V, since the URM09 outputs an analog voltage rather than a digital trigger/echo signal.

Elecvora expert review

Our verdict

The URM09 is a sensible choice when you want fast, repeatable ultrasonic ranging with minimal wiring. Its analog output and Gravity connector keep integration simple, though you trade some flexibility compared with digital trigger/echo sensors.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 30Hz sampling supports responsive obstacle detection
  • Built-in temperature compensation aids reading stability
  • Wide 3.3–5.5V supply and 3.3V/5V logic compatibility
  • Gravity PH2.0-3P connector simplifies hookup
  • Compact 47mm x 22mm board suits small builds

Cons

  • Requires a controller with an analog input
  • Analog output needs conversion to distance in your code
  • Ultrasonic sensing can be affected by soft or angled surfaces

Best for

Fast obstacle avoidance and distance measurement on Arduino and Raspberry Pi robots

Not ideal for

Projects without an analog input or those needing digital trigger/echo signalling

Specifications

Frequency (Hz)30
Operating Temperature (°C)-10 to 70
Length (mm)47
Width (mm)22
Shipping Weight0.024 kg
Shipping Dimensions6 × 5 × 1 cm

What's in the box

  • 1 x URM09 Ultrasonic Sensor (Gravity Analog)
  • 1 x PH2.0-3P Connector

Frequently Asked Questions

What is the measurement range of the URM09?
It measures from 2cm to 500cm, with 1cm resolution and 1% accuracy.
What voltage does the sensor need?
It runs from 3.3V to 5.5V DC and draws around 20mA.
Which boards can I use it with?
It is compatible with Arduino, Raspberry Pi and other controllers that use 3.3V or 5V logic levels and provide an analog input.
What comes in the package?
You receive one URM09 Ultrasonic Sensor (Gravity Analog) and one PH2.0-3P connector.
How does the sensor output distance?
It provides an analog voltage that your controller reads and converts into a distance value.
What temperatures can it operate in?
The sensor is rated for -10°C to 70°C.

Overview

The DFRobot Gravity URM09 is an analog ultrasonic distance sensor designed for fast-ranging and obstacle avoidance work. It emits a sound pulse at 30Hz, listens for the returning echo, and converts the timing into an analog voltage that your controller reads to estimate distance. Built-in temperature compensation helps the readings stay consistent as the surrounding air temperature changes.

With a 2cm to 500cm measurement range, 1cm resolution and 1% accuracy, the URM09 is suited to both close-range collision checks and wider room-scale sensing. The board measures 47mm x 22mm and connects through a Gravity PH2.0-3P interface, so it drops into existing Gravity-based builds without soldering.

Key Features

  • Fast sampling: 30Hz measurement frequency supports responsive obstacle detection.
  • Wide range: measures from 2cm up to 500cm.
  • Temperature compensation: built in to support stable distance readings.
  • Analog output: a simple voltage signal for your controller to interpret.
  • Flexible power: operates from 3.3V to 5.5V DC at around 20mA.

Specifications Explained

Frequency (30Hz): the sensor can take up to 30 measurements per second, which is useful when a robot or rover needs to react quickly to nearby objects.

Range and resolution: the 2cm to 500cm span covers short and medium distances, while 1cm resolution and 1% accuracy mean small changes in position are visible in the output.

Operating temperature: rated from -10°C to 70°C, covering indoor and sheltered outdoor use.

Size and weight: the 47mm x 22mm board and 0.024kg shipping weight keep it easy to mount on small chassis and compact builds.

Compatibility and Requirements

The URM09 accepts 3.3V to 5.5V DC and is compatible with Arduino, Raspberry Pi and other main-control boards that use 3.3V or 5V logic levels. A controller with an analog input is required to read the analog output. The included PH2.0-3P connector provides the Gravity-style link to your board.

Typical Uses

  • Obstacle avoidance on small robots and rovers
  • Distance measurement in Arduino and Raspberry Pi projects
  • Classroom and maker experiments with ultrasonic sensing
  • Simple presence or proximity detection in interactive builds

What's in the Box

  • 1 x URM09 Ultrasonic Sensor (Gravity Analog)
  • 1 x PH2.0-3P Connector

Quick specs

Frequency (Hz)
30
Operating Temperature (°C)
-10 to 70
Length (mm)
47
Width (mm)
22
Shipping Weight
0.024 kg
Shipping Dimensions
6 × 5 × 1 cm
See all specifications