Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny Type-C charger for single-cell 3.7V LiPo batteries with selectable 50/200/500mA current and TP4056X safety features. The LED status and external indicator option make it easy to monitor charging in embedded projects.

Key Highlights

  • Charges single-cell 3.7V lithium batteries via USB Type-C
  • Selectable 50mA, 200mA, or 500mA charging current
  • TP4056X IC with three-stage charging and thermal regulation
  • Ultra-compact 16.5 x 28mm board for space-limited builds
  • Onboard LED and support for external charge indicator
  • Ships at just 0.015kg for low-cost integration

Ideal For

  • Makers building compact battery-powered devices
  • Robotics enthusiasts needing embedded charging
  • Wearable electronics designers
  • Students learning about LiPo charging circuits
  • Prototypers using single-cell 3.7V batteries

Buying Tip

Match the charging current to your battery capacity: use 50mA for small cells under 400mAh, 200mA for mid-range, and 500mA only for batteries above 1000mAh.

Elecvora expert review

Our verdict

A well-designed, compact charger that offers flexible current selection and essential safety features for single-cell LiPo batteries. It is ideal for embedded projects where space is limited.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small size fits tight spaces
  • Selectable current for different battery capacities
  • Thermal regulation protects the chip
  • External indicator option adds convenience

Cons

  • Requires soldering to connect battery and pads
  • No built-in battery protection circuit
  • Bluetooth functionality is not essential for charging

Best for

Makers and engineers integrating LiPo charging into compact devices

Not ideal for

Users needing a ready-to-use charger with battery holder or protection circuitry

Specifications

Length (mm)16.5
Width (mm)28
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.015 kg
Shipping Dimensions9 × 6 × 3 cm

What's in the box

  • 1 x DFRobot LiPo Charger Type-C

Frequently Asked Questions

What type of battery does this charger support?
It supports single-cell 3.7V lithium batteries only. Do not use with multi-cell packs.
How do I change the charging current?
You can select 50mA, 200mA, or 500mA by bridging different bonding pads on the back of the module. The default is 50mA.
Can I charge a small battery at 500mA?
No, high current can damage small-capacity batteries. Use 50mA for batteries under 400mAh, 200mA for 400–1000mAh, and 500mA only for batteries above 1000mAh.
What does the LED indicate?
The LED flashes when no battery is connected, stays on during charging, and turns off when the battery is fully charged.
Does the charger have reverse polarity protection?
The product data does not specify reverse polarity protection. Always observe correct polarity when connecting the battery.
What is included in the package?
The package includes one DFRobot LiPo Charger Type-C module. No battery or cable is included.

Overview

The DFRobot LiPo Charger Type-C is a compact charging module designed specifically for single-cell 3.7V lithium batteries. Its small footprint (16.5mm x 28mm) makes it easy to embed into projects where space is tight, from wearable electronics to small robots. The module uses the TP4056X charging IC, which provides a complete charging solution with three stages: trickle charge, constant current, and constant voltage. This staged approach helps protect the battery and can reduce overall charging time.

Key Features

  • Type-C input: Power the charger from any compatible USB-C source.
  • Selectable current: Choose 50mA, 200mA, or 500mA by selecting different bonding pads on the back. The default is 50mA.
  • TP4056X charging IC: Offers thermal feedback that automatically adjusts charging current to limit chip temperature under high-power or high-temperature conditions.
  • LED status: The onboard LED flashes when no battery is connected, stays on during charging, and turns off when the battery is full. It does not drain the battery.
  • External indicator support: Connect an external LED to monitor charging status when the module is integrated into an enclosure.

Specifications Explained

Dimensions: At 16.5mm long and 28mm wide, the charger is small enough to fit alongside a battery in compact devices. Bluetooth 5.1 dual mode: The module supports Bluetooth 5.1 dual-mode functionality, though this is a secondary feature and not required for charging. Charging current: The three selectable currents let you match the charger to your battery capacity. Use 50mA for 100–400mAh batteries, 200mA for 400–1000mAh, and 500mA for batteries above 1000mAh. Shipping weight: At 0.015kg, it adds negligible weight to any shipment or build.

Compatibility and Requirements

This charger is intended for single-cell 3.7V lithium batteries. It requires a USB-C power source. The charging current must be selected according to battery capacity: low-current mode (50mA) can safely charge large-capacity batteries, but high-current settings should not be used with small-capacity batteries, as excessive current may cause damage or explosion. No other accessories are required for basic operation, though an external indicator can be added.

Typical Uses

Makers and hobbyists can use this module to add charging capability to custom enclosures, portable sensors, or small robots. It is also suitable for prototyping on breadboards or integrating into wearable projects. The external indicator option is handy when the charger is hidden inside a device and you need a visible status light.

What's in the Box

1 x DFRobot LiPo Charger Type-C.

Quick specs

Length (mm)
16.5
Width (mm)
28
Bluetooth Version
Supports Bluetooth 5.1 dual mode function
Shipping Weight
0.015 kg
Shipping Dimensions
9 × 6 × 3 cm
See all specifications