Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact single-cell lithium-ion and lithium-polymer charger board with Type-C USB input and JST or terminal battery connection. It delivers a pre-adjusted 4.2V charge with C/10 termination at a default 500mA rate, making battery charging simple to add to any project.

Key Highlights

  • Charges single-cell 3.7V Li-Ion and Li-Polymer batteries
  • Type-C USB input plus JST-type and terminal battery access
  • Pre-adjusted 4.2V charging voltage with 1.5% accuracy
  • C/10 charge termination for safe end-of-charge
  • Default 500mA rate with 100mA, 700mA and 1000mA options
  • Compact 38 x 32mm board with two mounting holes

Ideal For

  • Makers building portable or wearable electronics
  • Students and educators learning battery charging basics
  • RC and FPV hobbyists charging single-cell LiPo packs
  • Engineers prototyping small battery-powered devices
  • Robot builders using 3.7V lithium cells

Buying Tip

Check that your battery is a single-cell 3.7V lithium-ion or lithium-polymer pack and confirm the connector type matches the JST-type or terminal access before ordering.

Elecvora expert review

Our verdict

The DFRobot Lithium Battery Charger V1.0 is a straightforward, well-focused charging board for single-cell lithium packs. Its Type-C input, multiple connection options and accurate 4.2V output make it a practical choice for makers who need reliable charging without extra complexity.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple Type-C USB power input
  • JST-type and terminal battery connections
  • Pre-adjusted 4.2V with 1.5% accuracy
  • C/10 charge termination for safety
  • Compact board with mounting holes

Cons

  • Only supports single-cell batteries
  • Battery and USB cable not included
  • Charge current options may require configuration

Best for

Makers and hobbyists charging single-cell 3.7V lithium batteries in portable projects

Not ideal for

Users needing to charge multi-cell or non-lithium battery packs

Specifications

Item TypeAccessory
InterfaceCharging from Type-c usb, JST type or terminal access battery
Accuracy1.5% (pre-adjusted to 4.2V charging voltage) C/10 charge termination
Model No. / Namesingle-cell lithium-ion
Length (mm)38
Width (mm)32
Shipping Weight0.015 kg
Shipping Dimensions9 × 8 × 3 cm

What's in the box

  • 1 x DFRobot Lithium Battery Charger V1.0

Frequently Asked Questions

What type of batteries can this charger handle?
It is designed for single-cell lithium-ion or lithium-polymer batteries only. Do not use it with multi-cell packs or other battery chemistries.
How do I connect the battery to the charger?
You can use the JST-type connector or the terminal access points on the board. Make sure to observe correct polarity when connecting.
What is the default charging current?
The default rate is 500mA. The board also supports 100mA, 700mA and 1000mA options for different battery sizes.
Does the charger stop automatically when the battery is full?
Yes, it uses C/10 charge termination to end the charge cycle when the current drops to one-tenth of the set rate, helping prevent overcharging.
What is included in the package?
The package includes one DFRobot Lithium Battery Charger V1.0. Battery and USB cable are not included.
What is the operating temperature range?
The charger is rated for operation between -40°C and 85°C.

Overview

The DFRobot Lithium Battery Charger V1.0 is a dedicated charging board for single-cell lithium-ion and lithium-polymer batteries. It combines a Type-C USB input, a JST-type battery connector and terminal access on one small PCB, so you can recharge a 3.7V cell without building a charging circuit from scratch. The board is pre-adjusted to a 4.2V charging voltage with 1.5% accuracy and uses C/10 charge termination to end the charge cycle correctly. A status LED indicates charging activity, and two mounting holes let you fix the board inside an enclosure or project frame.

Key Features

  • Single-cell focus: designed specifically for one lithium-ion or lithium-polymer cell.
  • Flexible connections: charge from Type-C USB, or connect the battery through the JST-type connector or terminal access.
  • Accurate voltage: factory pre-adjusted to 4.2V with 1.5% accuracy.
  • Safe termination: C/10 charge termination stops the cycle at the right point.
  • Selectable current: 100mA, 500mA (default), 700mA and 1000mA options.
  • Compact footprint: 38mm x 32mm with mounting holes for easy integration.

Specifications Explained

The 4.2V charging voltage is the standard full-charge level for single-cell lithium batteries, and the 1.5% accuracy means the charger holds that level closely. C/10 termination ends the charge when the current falls to one-tenth of the set rate, which helps avoid overcharging. The default 500mA rate is a practical middle ground for many small and medium packs, while the 100mA, 700mA and 1000mA options let you match the charger to different battery capacities. The Type-C USB input makes the board easy to power from common USB sources, and the JST-type connector or terminal access gives you wiring flexibility. The board measures 38mm by 32mm and weighs only 15g including shipping packaging, so it adds almost nothing to a portable build.

Compatibility and Requirements

This charger is intended for single-cell lithium-ion or lithium-polymer batteries only. It is not designed for multi-cell packs or other battery chemistries. You will need a Type-C USB power source and a compatible battery connection, either through the JST-type connector or the terminal access. The operating environment temperature range is -40°C to 85°C.

Typical Uses

Use the DFRobot Lithium Battery Charger V1.0 in portable electronics, wearable projects, small robots, sensor nodes and educational builds that run on a single 3.7V lithium cell. It is also handy as a standalone charging module for spare LiPo packs used in RC and FPV projects when the pack uses a matching connector.

What's in the Box

1 x DFRobot Lithium Battery Charger V1.0.

Quick specs

Item Type
Accessory
Interface
Charging from Type-c usb, JST type or terminal access battery
Accuracy
1.5% (pre-adjusted to 4.2V charging voltage) C/10 charge termination
Model No. / Name
single-cell lithium-ion
Length (mm)
38
Width (mm)
32
See all specifications