Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The DFRobot MAX202 RS232 to TTL Converter lets Arduino and other microcontrollers talk to RS232 devices through a simple 4-pin header. It supports baud rates from 300 to 115200 bps and includes TX/RX LED indicators for easy signal monitoring.

Key Highlights

  • Converts RS232 signals to TTL (0-5V) and vice versa
  • 4-pin header: GND, Logic Out (STX), +5V, Logic In (SRX)
  • Supports baud rates from 300 to 115200 bps
  • LED indicators for TX and RX signal activity
  • Compatible with Arduino and other microcontrollers
  • Compact module for radio, GPS, and MCU programming tasks

Ideal For

  • Electronics hobbyists interfacing Arduino with RS232 devices
  • Repair technicians working on set-top boxes or hard drives
  • Developers programming STC, NXP, Renesas, or STM32 microcontrollers
  • Makers adding RS232 connectivity to GPS or radio projects
  • Students learning serial communication protocols

Buying Tip

Check that your target device uses standard RS232 voltage levels and that you have a 5V supply available; this module does not include a USB interface or cables.

Elecvora expert review

Our verdict

The DFRobot MAX202 RS232 to TTL Converter is a reliable, no-fuss solution for adding RS232 capability to Arduino and other microcontroller projects. Its wide baud rate support and clear LED indicators make it a practical choice for both beginners and experienced users.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple 4-pin header for easy wiring
  • Wide baud rate range from 300 to 115200 bps
  • TX and RX LED indicators for troubleshooting
  • Compact and lightweight design

Cons

  • Requires a 5V power source, which may not be available on all boards
  • No USB interface; needs an RS232 port or adapter on the host side

Best for

Arduino users needing to interface with RS232 devices

Not ideal for

Projects requiring USB-to-serial conversion or 3.3V logic levels

Specifications

Item TypeAccessory
Connector Type4-pin header with GND, Logic Out (STX), +5V, Logic In (SRX).
Baud Rate (bps)Supports 300 to 115200 baud.
Shipping Weight0.015 kg
Shipping Dimensions9 × 7 × 3 cm

What's in the box

  • 1 x DFRobot MAX202 RS232 to TTL Converter

Frequently Asked Questions

What is the purpose of this converter?
It converts RS232 signal levels to TTL (0-5V) and vice versa, allowing microcontrollers like Arduino to communicate with RS232 devices.
Which microcontrollers are compatible?
It is compatible with Arduino and other microcontrollers that use TTL-level serial communication and can provide a 5V supply.
What baud rates are supported?
The module supports baud rates from 300 to 115200 bps.
How is the module powered?
It requires a 5V power source, which can be taken from the microcontroller's 5V pin or an external supply.
What is included in the package?
The package includes one DFRobot MAX202 RS232 to TTL Converter module. Cables and other accessories are not included.
Can I use this with a 3.3V system?
The module is designed for 5V TTL logic. For 3.3V systems, level shifting may be required, but this is not specified in the product data.

Overview

The DFRobot MAX202 RS232 to TTL Converter is a ready-to-use interface module that translates between standard RS232 voltage levels and TTL logic levels. It is built around the MAX202 level shifter, a proven IC for bidirectional serial conversion. This makes it an essential tool for anyone who needs to connect a microcontroller to RS232 equipment, whether for programming, data exchange, or repair work.

Key Features

  • Bidirectional conversion: Converts RS232 signals to TTL (0-5V) and TTL signals back to RS232.
  • Simple connectivity: A 4-pin header provides GND, Logic Out (STX), +5V, and Logic In (SRX) connections.
  • Wide baud rate range: Operates from 300 to 115200 bps, covering most common serial communication speeds.
  • Visual feedback: Onboard LED indicators for TX and RX make it easy to confirm data flow.
  • Arduino-friendly: Can be connected directly to Arduino Serial pins (0,1) to add RS232 capability.

Specifications Explained

The 4-pin header is the primary interface: GND provides the common ground, +5V supplies power to the module, Logic Out (STX) carries TTL-level data from the RS232 side to your microcontroller, and Logic In (SRX) accepts TTL-level data from your microcontroller to be converted to RS232. The supported baud rate range of 300 to 115200 bps ensures compatibility with a broad spectrum of serial devices, from slow legacy equipment to faster embedded systems. The module's compact size and lightweight design (shipping weight 0.015 kg) make it easy to integrate into tight enclosures or carry in a toolkit.

Compatibility and Requirements

This converter is compatible with Arduino boards and other microcontrollers that use TTL-level serial communication. It requires a 5V power source, which can typically be taken from the Arduino's 5V pin. No additional drivers are needed. The module works with any RS232 device that operates within the supported baud rate range.

Typical Uses

Common applications include programming STC, NXP, Renesas, STM32, and N+-2EC microcontrollers; radio modifications; phone flashing; XBOX360 flashing; GPS integration; vehicle detection systems; DVD flashing; hard disk repair; and set-top box upgrades. It is also useful for general serial communication between a PC and a microcontroller when an RS232 port is available.

What's in the Box

Package includes: 1 x DFRobot MAX202 RS232 to TTL Converter.

Quick specs

Item Type
Accessory
Connector Type
4-pin header with GND, Logic Out (STX), +5V, Logic In (SRX).
Baud Rate (bps)
Supports 300 to 115200 baud.
Shipping Weight
0.015 kg
Shipping Dimensions
9 × 7 × 3 cm
See all specifications