Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact I2S digital Class D amplifier based on the MAX98357A, delivering over 2.5W from a 3.3-5V supply. It gives microcontroller audio projects a simple digital path to a speaker with selectable channel modes and gain.

Key Highlights

  • MAX98357A I2S digital Class D amplifier with over 2.5W output at 5V
  • Wide 3.3V to 5V operating voltage for flexible project power
  • Sample rates from 8kHz to 96kHz with 105dB dynamic range
  • Switchable channel modes and adjustable gain via SD pin resistors
  • Stamp holes support SMT and DIP mounting plus breadboard use
  • Two speaker connection options: PH2.0 connector and stamp holes

Ideal For

  • ESP32 and microcontroller developers adding digital audio output
  • Makers building smart home voice interaction devices
  • IoT project builders needing status sounds and prompts
  • Robotics hobbyists adding speech or sound effects
  • Audio hobbyists creating compact Bluetooth speaker builds

Buying Tip

Check that your board has a true I2S output and plan your speaker impedance and supply voltage together, since output power depends on running at 5V into a 4 ohm load.

Elecvora expert review

Our verdict

A well-judged little amplifier for anyone who wants digital audio from a microcontroller without designing an analog stage. It is compact, flexible on voltage and easy to mount, though it is a single-channel board with modest power.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple I2S digital input keeps wiring clean
  • Runs from 3.3V or 5V for flexible project power
  • Stamp holes support SMT, DIP and breadboard use
  • Selectable channel modes and adjustable gain
  • Two speaker connection options built in

Cons

  • Single channel only, so no stereo without a second module
  • Output power is modest and depends on a 5V supply and 4 ohm speaker
  • Requires a microcontroller with I2S output and separate speaker

Best for

Compact microcontroller audio, IoT prompts and smart home voice projects

Not ideal for

High-power or stereo room-filling audio systems

Specifications

Output Power (W)1.8 to 2.5
Operating Voltage (VDC)3.3 to 5
No. of Channels1
MCU SeriesMAX98357A
Communication InterfaceI2S interface
Operating Temperature (°C)-40℃ - +80℃
Storage Temperature (°C)-40℃ - +80℃
Dimensions (L x W x H) mm18mm × 18mm/ 0.059 × 0.059 Without packaging
Sample Rate8kHz~96kHz
Dynamic Range (dB)105DB (A-weighted, VRMS = 2.54V, 24- or 32-bit data)
Efficiency92% (ZSPK = 8I + 68FH, THD+N = 10%, f = 1kHz, gain = 12dB)
Frequency Response±0.2dB
Switching frequency330kHz Class D
Spectral Bandwidth±12.5kHz
Shipping Weight0.007 kg
Shipping Dimensions6 × 6 × 3 cm

What's in the box

  • 1 x DFRobot MAX98357 I2S Amplifier Module

Frequently Asked Questions

What is the MAX98357 module used for?
It amplifies digital I2S audio from a microcontroller and drives a speaker directly. It is commonly used for IoT announcements, smart home voice devices, Bluetooth audio players and robotic sound effects.
Which boards can I use it with?
Any microcontroller or audio source that provides an I2S output can feed the module. The product data specifically notes I2S-capable boards such as ESP32 as a typical match.
What supply voltage does it need?
The module accepts 3.3V to 5V DC. Running at 5V into a 4 ohm speaker gives the highest output, quoted at over 2.5W.
How do I change the channel mode?
Channel mode is set by the resistor fitted on the SD port, selecting off, left, right or mixed. The board is supplied in mixed mode by default.
How is the speaker connected?
You can use the PH2.0 connector for a quick connection or solder the speaker wires to the stamp holes for a permanent installation.
What is included with the module?
The package contains one DFRobot MAX98357 I2S Amplifier Module. Speaker, wiring and microcontroller are not included.

Overview

The DFRobot MAX98357 I2S Amplifier Module brings digital audio output to microcontroller projects without the bulk of a traditional analog amplifier stage. At its core is the MAX98357A, a single-channel Class D amplifier that receives audio over an I2S interface and drives a speaker directly. Because the audio stays digital until the amplifier, wiring is simple and noise pickup on long analog cables is avoided.

The board is small and designed for embedded builds. Stamp holes along the edges let you solder it flat onto a PCB or place it in a breadboard, while a PH2.0 connector offers a quick speaker hookup. It runs from 3.3V to 5V, so it can share a supply with common microcontroller boards.

Key Features

  • MAX98357A Class D amplifier with a single channel and I2S digital input
  • Over 2.5W output when driven at 5V into a 4 ohm speaker
  • 8kHz to 96kHz sample rate support for speech, music and alert sounds
  • 105dB dynamic range (A-weighted) for clean quiet passages and strong peaks
  • Selectable channel modes - off, left, right and mixed - set by the resistor on the SD port, defaulting to mixed
  • Adjustable gain to match different source levels
  • Dual speaker connection through PH2.0 or stamp holes
  • Stamp-hole footprint for SMT and DIP mounting

Specifications Explained

Output power: The module is rated at 1.8W to 2.5W depending on supply and load, with over 2.5W achievable at 5V into a 4 ohm speaker. That is enough for clear room-level sound in small devices.

Voltage: A 3.3V to 5V input range means the amplifier can run from the same rail as most logic boards. Higher voltage generally gives more output headroom.

Sample rate and dynamic range: Support for 8kHz to 96kHz covers voice prompts up to full music playback, and the 105dB dynamic range helps preserve detail across the volume range.

Class D efficiency: The 330kHz switching Class D design is rated at 92% efficiency under the stated test conditions, which helps keep heat low in compact enclosures.

Temperature range: Operation and storage are both rated from -40 degrees C to +80 degrees C, suitable for typical indoor and sheltered installations.

Compatibility and Requirements

The module requires a microcontroller or audio source with an I2S output. It needs a 3.3V to 5V DC supply and a suitable speaker connected through the PH2.0 connector or the stamp holes. Channel mode and gain are configured by resistor values on the SD port. No other accessories are included beyond the module itself.

Typical Uses

  • IoT nodes that announce status or sensor events
  • Smart home voice interaction devices
  • Bluetooth audio players built around I2S-capable boards
  • Robotic devices needing sound effects or speech
  • General microcontroller audio projects with compact enclosures

What's in the Box

1 x DFRobot MAX98357 I2S Amplifier Module.

Quick specs

Output Power (W)
1.8 to 2.5
Operating Voltage (VDC)
3.3 to 5
No. of Channels
1
MCU Series
MAX98357A
Communication Interface
I2S interface
Operating Temperature (°C)
-40℃ - +80℃
See all specifications