
1 / 3 · Click to enlarge
AI Summary
A waterproof IP68 ambient light sensor that reports 0 to 200,000 lux over RS485 Modbus-RTU. Its wide 5-32V DC input and under 10mA draw make it simple to power in outdoor and industrial installations.
Key Highlights
- Measures ambient light from 0 to 200,000 lux
- RS485 output using the Modbus-RTU protocol
- IP68 waterproof rating for outdoor and wet locations
- Wide 5-32V DC supply with under 10mA current draw
- 0.01 lux resolution and approximately 5% accuracy
- Works with Arduino via a TTL-to-RS485 adapter
Ideal For
- Greenhouse and smart agriculture installers monitoring light levels
- Weather station builders needing outdoor lux data
- Automation engineers controlling lighting from ambient readings
- Makers using Arduino with an RS485 adapter
- Environmental and industrial data logging projects
Buying Tip
Confirm you have an RS485 adapter or TTL-to-RS485 converter for your controller before wiring the sensor, since the module outputs Modbus-RTU over RS485 rather than an analog voltage.
Elecvora expert review
Our verdict
A practical choice when you need light data outdoors or over long cable runs, since the RS485 Modbus-RTU output and IP68 housing solve two common weak points of simple analog sensors. The wide voltage input and low current draw make it easy to fit into existing control cabinets.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- IP68 housing suits exposed outdoor mounting
- Very wide 0-200,000 lux range
- RS485 Modbus-RTU supports longer, noisier cable runs
- Flexible 5-32V DC input with under 10mA draw
- Fine 0.01 lux resolution
Cons
- Requires an RS485 adapter, which is not included
- Modbus-RTU configuration adds setup steps compared with analog sensors
- Accuracy of about plus or minus 5 percent may not suit precision lab work
Best for
Outdoor, agricultural and industrial light monitoring over RS485
Not ideal for
Quick analog-only breadboard tests without an RS485 adapter
Specifications
| Power Supply Voltage (V) | 5 to 32VDC |
|---|---|
| Working Current (mA) | <10mA |
| Output Mode | RS485 |
| Protection level | IP68 |
What's in the box
- 1 x DFRobot RS485 Waterproof Ambient Light Sensor (0-200,000 Lux)
Frequently Asked Questions
What light range does this sensor measure?
How does the sensor connect to a microcontroller?
What power supply does it need?
Can it be used outdoors in rain?
What is included with the sensor?
How accurate are the readings?
Overview
The DFRobot RS485 Waterproof Ambient Light Sensor is a digital module for measuring how much light is present in an environment, from near-darkness up to bright direct sun. It reports values across a 0 to 200,000 lux range and sends them over an RS485 bus using the Modbus-RTU protocol, which keeps data reliable over longer cable runs than a simple analog signal.
Because the enclosure carries an IP68 protection rating, the sensor can be mounted outdoors or in damp, dusty and washdown-prone areas. Power is flexible: it accepts anything from 5 to 32V DC and draws less than 10mA, so it can share a supply with other equipment in a control cabinet or field enclosure.
Key Features
- Wide measurement range: covers 0 to 200,000 lux, spanning dim interiors and full daylight.
- RS485 Modbus-RTU output: a robust serial interface suited to longer cable distances.
- IP68 protection: sealed against water and dust for outdoor and industrial mounting.
- Flexible power: 5 to 32V DC input with under 10mA working current.
- Fine resolution: 0.01 lux steps with approximately plus or minus 5 percent accuracy.
Specifications Explained
Measurement range and resolution
A 0 to 200,000 lux span means the sensor can report both low indoor light levels and intense outdoor sunlight. The 0.01 lux resolution lets you see small changes at the dark end of the scale, which is useful when tracking twilight, shade or dim rooms. Accuracy is stated at about plus or minus 5 percent.
RS485 and Modbus-RTU
RS485 is a differential serial standard that tolerates longer wiring and electrical noise better than analog voltage outputs. Modbus-RTU is the protocol used to request readings, so your controller reads the sensor as a Modbus device rather than sampling an analog pin.
Power supply
The 5 to 32V DC input range means the sensor can run from common 5V, 12V or 24V supplies. Working current stays below 10mA, so the power budget is small.
IP68 protection
The IP68 rating indicates the housing is sealed against dust and against water immersion under the conditions defined by that rating, making it suitable for exposed outdoor installations.
Compatibility and Requirements
The sensor is designed for Arduino and other microcontroller platforms. To connect it you need an RS485 interface on the controller side, such as a TTL-to-RS485 converter or a Gravity RS485 adapter. The controller then communicates with the sensor using Modbus-RTU. Plan for a suitable DC supply within the 5 to 32V range and correct RS485 wiring between the adapter and the sensor.
Typical Uses
- Greenhouse and grow-room light monitoring
- Weather stations and outdoor environmental logging
- Automated outdoor lighting control
- Industrial and building light-level monitoring
- Smart agriculture and research data collection
What's in the Box
1 x DFRobot RS485 Waterproof Ambient Light Sensor (0-200,000 Lux).
Quick specs
- Power Supply Voltage (V)
- 5 to 32VDC
- Working Current (mA)
- <10mA
- Output Mode
- RS485
- Protection level
- IP68


















