Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name DFRobot Gravity Lab Grade Analog ORP Sensor; interface PH2.0(3 foot patch); operating temperature (°c) 5-70℃.

Key Highlights

  • Model No. / Name: DFRobot Gravity Lab Grade Analog ORP Sensor
  • Interface: PH2.0(3 foot patch)
  • Operating Temperature (°C): 5-70℃

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameDFRobot Gravity Lab Grade Analog ORP Sensor
InterfacePH2.0(3 foot patch)
Operating Temperature (°C)5-70℃
Dimensions (L x W x H) mm40mm X 27mm(1.57″x1.06″)
Measurement Range- 2000mV—2000mV
Response Time(s)≤20sec
Shipping Weight0.164 kg
Shipping Dimensions19 × 6 × 5 cm

Overview

The DFRobot SEN0165 Gravity ORP Sensor Water Quality Monitoring Kit for Aquaculture, Hydroponics & Lab Testing, made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: DFRobot Gravity Lab Grade Analog ORP Sensor
  • Interface: PH2.0(3 foot patch) (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): 5-70℃
  • Dimensions (L x W x H) mm: 40mm X 27mm(1.57″x1.06″) (measure your mounting space before ordering)
  • Measurement Range: - 2000mV—2000mV (quoted range is usually line-of-sight; walls and interference shorten it)
  • Response Time(s): ≤20sec
  • Shipping Weight: 0.164 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 19 × 6 × 5 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is DFRobot SEN0165 Gravity ORP Sensor Water Quality Monitoring Kit for Aquaculture, Hydroponics & Lab Testing. In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water via direct contact. Water is a critical control point of contact where proper treatment can greatly reduce these microbes, thereby reducing the chances of illness and pollution. While traditional ORP meters are hard to get or use, this Analog ORP Meter is a highly compact ORP monitoring system that fits into your Arduino. This design configuration allows the user to accurately monitor ORP without having to add any additional circuitry or components to your design. Communication with the Analog ORP Meter is done using only simple wiring and programming.

Applications:

  1. Water Quality Testing
  2. Aquaculture
  3. Marine Science
  4. Hydroponic Gardening
  5. General Chemistry

Connection Diagram:


Useful Link:

https://www.dfrobot.com/blog-1610.html https://wiki.dfrobot.com/Analog_ORP_Meter_SKU_SEN0165_


Features:

  1. Analog ORP Meter can be done using only simple wiring
  2. Zero calibration button
  3. Power Indicator LED
  4. ORP Probe with BNC Connector

Package Includes:

1 x ORP probe (BNC connector)

1 x ORP probe circuit board

1 x Analog cable

Quick specs

Model No. / Name
DFRobot Gravity Lab Grade Analog ORP Sensor
Interface
PH2.0(3 foot patch)
Operating Temperature (°C)
5-70℃
Dimensions (L x W x H) mm
40mm X 27mm(1.57″x1.06″)
Measurement Range
- 2000mV—2000mV
Response Time(s)
≤20sec
See all specifications