Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by DFRobot, this df robot modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Accessory; charging current 2A; operating temperature (°c) -40 to 85. Check that your power source supplies 5V 1.5A before connecting it.

Key Highlights

  • Item Type: Accessory
  • Charging Current: 2A
  • Operating Temperature (°C): -40 to 85

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeAccessory
Charging Current2A
Operating Temperature (°C)-40 to 85
Batteries Required3.7V Lithium Battery
USB output voltage5V 1.5A
Solar input voltage7V-30V
Length (mm)78
Width (mm)68
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.064 kg
Shipping Dimensions11 × 9 × 3 cm

Overview

The DFRobot Solar Power Manager (for 9V/12V/18V Panels), made by DFRobot, is listed in our df robot modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Accessory
  • Charging Current: 2A (check which plug or cable it needs)
  • Operating Temperature (°C): -40 to 85
  • Batteries Required: 3.7V Lithium Battery (note the battery type so you can order spares or the right charger)
  • USB output voltage: 5V 1.5A (match this to your power supply; too high a voltage can damage the part)
  • Solar input voltage: 7V-30V (match this to your power supply; too high a voltage can damage the part)
  • Length (mm): 78 (measure your mounting space before ordering)
  • Width (mm): 68 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers. Solar Power Manager is a complete small power and high-efficiency solar power management module. It features as MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel. Apart from serving as a solar charger, the module can provide up to 2A charging current to 3.7V Li battery with AC adapter (within 30V) or USB charger, three individual ON/OFF controllable DC-DC converters with 5V 1.5A, 3.3V 1A and 9V/12V 0.5A outputs. These features satisfy the needs of various solar power projects and low-power applications. The module also employs various protect functions, such as Li battery protection, battery/solar panel reverse connection protection, output over temperature and over current/short circuit protection, which greatly improves the stability and safety of the system.

Applications:

  1. Smart solar environment monitor system
  2. Solar powered robot
  3. Small solar street lamp
  4. Solar power bank

Useful link:

For more information refer to the tutorial

Features:

  1. Constant voltage MPPT algorithm, maximizing solar panel efficiency
  2. 7V~30V wide solar panel input voltage
  3. Various charging mode: solar/AC adapter/USB charger (2A max charge current)
  4. Three individual ON/OFF controllable regulated power supply for low-power applications
  5. All multi-layer ceramic capacitors (MLCC), safe, stable and high-efficiency
  6. Various protection functions
  7. USB connector with ESD shell
  8. Solar power management IC: LTC3652
  9. Solar input voltage (SOLAR IN): 7V~30V
  10. Battery input (BAT IN): 3.7V single cell Li-polymer/Li-ion battery
  11. Charge current(USB/SOLAR IN): 2A Max
  12. Charging cutoff voltage(USB/SOLAR IN): 4.2V±1%
  13. MPPT setting voltages:OFF/9V/12V/18V
  14. USB IN voltage: 5V
  15. Regulated power supply: OUT1=5V 1.5A; OUT2=3.3V 1A; OUT3=9V/12V 0.5A
  16. Regulated power supply efficiency (3.7V battery IN) OUT1: 86%@50%Load OUT2: 92%@50%Load OUT3 (9V OUT): 89%@50%Load
  17. USB charge efficiency: 84%@1A
  18. Solar charge efficiency (18V SOLAR IN):78%@1A
  19. Maximum quiescent current: <3 mA
  20. Protections BAT IN: over charge /over discharge /over current /reverse connection protection OUT1-OUT3/USB OUT: short circuit/over current/over heat protection SOLAR IN: reverse connection protection

Package Includes:

1 x Solar Power Manager;

3 x Black Jumperbsp

4 x M3 nylon pillar

4 x M3 stainless steel screw

1 x 14mm*14mm Aluminum cooling fin

1 x 14mm*14mm Thermal conductive silicone pad

1 x Female DC power jack adapter

Quick specs

Item Type
Accessory
Charging Current
2A
Operating Temperature (°C)
-40 to 85
Batteries Required
3.7V Lithium Battery
USB output voltage
5V 1.5A
Solar input voltage
7V-30V
See all specifications