Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A straight female micro BNC jack for through-hole PCB mounting with solder termination and a nickel-plated zinc alloy body. It handles 50 or 75 ohm lines and its bayonet coupling makes repeated connect and disconnect cycles quick and reliable.

Key Highlights

  • Straight female micro BNC jack for PCB through-hole mounting
  • Solder termination for a permanent board-level connection
  • Nickel-plated zinc alloy body for a durable, industry-grade finish
  • Supports both 50 ohm and 75 ohm impedance applications
  • Bayonet coupling for quick connect and disconnect
  • Rated for 500 or more mating cycles

Ideal For

  • RF and electronics designers laying out PCB-mounted antenna or video interfaces
  • Repair technicians replacing a worn board-level BNC jack
  • Broadcast, CCTV and CATV installers building or servicing equipment
  • Hobbyists and makers working on radios, monitors and instrumentation
  • Prototyping engineers who need a compact, solderable RF connector

Buying Tip

Check your PCB footprint and panel cutout against a straight through-hole micro BNC jack before soldering, and match the connector impedance to your cable and signal chain.

Elecvora expert review

Our verdict

A well-finished, compact board-mounted BNC jack that covers both 50 and 75 ohm work and is easy to service thanks to the bayonet coupling. It is a solid choice for equipment builders who are comfortable soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual 50/75 ohm impedance support
  • Durable nickel-plated zinc alloy body
  • Quick bayonet connect and disconnect
  • Rated for 500 or more mating cycles
  • Compact straight profile for tight layouts

Cons

  • Requires soldering for installation
  • Board footprint and panel cutout must be checked before fitting
  • Not a cable-mount connector, so it suits equipment rather than inline cable use

Best for

PCB-mounted RF interfaces in video, broadcast, telecom and instrumentation equipment

Not ideal for

Inline cable assemblies or field repairs that need a cable-mount connector

Specifications

ManufacturerElecBee
OrientationStraight
GenderFemale
Mounting TypePCB Mount
Termination StyleSolder Type
Mounting FeatureThrough Hole
PolarityStandard
Body MaterialZinc Alloy
Body PlatingNickel Plating
Impedance (Ω)75, 50
Shield TerminationNA
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x Micro BNC Connector Panel Mount Straight Female For PCB Mount

Frequently Asked Questions

Is this connector male or female?
It is a female jack with standard polarity, designed to mate with a standard male BNC cable connector.
Does it work with both 50 and 75 ohm systems?
Yes, the connector is listed for both 50 ohm and 75 ohm impedance. Match it to the impedance of your cable and the rest of your signal path.
How is it mounted and terminated?
It is a through-hole PCB mount part with solder termination, so the legs pass through the board and are soldered in place.
What is included in the package?
The package contains one Micro BNC Connector Panel Mount Straight Female for PCB Mount.
How many times can it be mated and unmated?
The connector is rated for 500 or more mating cycles when used with a compatible male BNC connector.
How should I care for it?
Keep the mating face clean and dry, avoid bending the soldered pins, and check the bayonet coupling for wear if the connection feels loose.

Overview

The ElecBee Micro BNC Connector is a straight female jack built for panel and PCB mounting. It terminates to a board by solder through through-hole mounting, so the connector sits securely on the PCB and provides a stable RF interface at the edge of your design. The body is made from zinc alloy with nickel plating, giving it a clean, corrosion-resistant finish suited to equipment that is handled and serviced regularly.

Because the connector accepts both 50 ohm and 75 ohm impedance, it can be used across a wide spread of RF signal paths rather than being locked to one system type. The bayonet coupling is the familiar BNC push-and-twist mechanism, which makes connecting and disconnecting a cable fast without tools.

Key Features

  • Straight female jack: a compact board-mounted interface with standard polarity.
  • Through-hole PCB mounting: the legs pass through the board for a mechanically stable solder joint.
  • Solder termination: a permanent electrical connection that suits fixed installations.
  • Zinc alloy body with nickel plating: a durable, industry-grade finish.
  • Dual impedance support: works with 50 ohm and 75 ohm systems.
  • Bayonet coupling: quick to mate and unmate by hand.

Specifications Explained

Mounting type and feature: PCB mount with through-hole legs means the connector is designed to be soldered into a board rather than clamped to a cable. This is the right choice when the connector needs to be part of the equipment itself, such as on a front panel board or an interface card.

Termination style: solder termination gives a reliable, low-resistance joint. It requires a soldering iron and basic board work, so plan for that during assembly or repair.

Impedance: the connector is listed for both 50 and 75 ohm. Match it to the impedance of the cable and the rest of your signal chain for best results.

Body material and plating: zinc alloy provides mechanical strength, and nickel plating adds a hard, corrosion-resistant surface that holds up to repeated handling.

Compatibility and Requirements

This is a female BNC jack with standard polarity and bayonet coupling, so it mates with standard male BNC cable connectors. It is intended for through-hole PCB mounting and requires soldering to install. Confirm that your board footprint and panel cutout suit a straight, board-mounted jack before ordering.

Typical Uses

Micro BNC board connectors like this one are commonly found in antennas, cable assemblies, automotive electronics, radios, video equipment, broadcast gear, telecom and satcom hardware, monitors, recorders, switchers, base stations, medical equipment, instrumentation, CCTV, CATV and HDTV installations. Anywhere a compact, serviceable RF interface is needed on a PCB, this connector is a sensible fit.

What's in the Box

One Micro BNC Connector Panel Mount Straight Female for PCB Mount.

Quick specs

Manufacturer
ElecBee
Orientation
Straight
Gender
Female
Mounting Type
PCB Mount
Termination Style
Solder Type
Mounting Feature
Through Hole
See all specifications