Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 50 ohm SMB right-angle male connector that solders into PCB through-holes for a low-profile coaxial interface. The snap-on coupling makes repeated mating fast, and the gold-plated copper body supports stable RF contact.

Key Highlights

  • 50 ohm SMB male plug with right-angle body
  • Solder termination into PCB through-holes
  • Snap-on coupling for quick, repeatable mating
  • Gold-plated copper body for contact stability
  • Compact footprint for tight board layouts
  • Rated for operating temperatures of -65°C to +155°C

Ideal For

  • RF and wireless board designers needing a low-profile 50 ohm PCB interface
  • Hobbyists building GPS, telemetry or radio modules
  • Test and instrumentation engineers assembling RF test fixtures
  • Technicians servicing routers, base stations and M2M devices

Buying Tip

Check your PCB footprint and pin spacing against the connector drawing before soldering, and confirm you are mating it to a standard-polarity SMB female jack.

Elecvora expert review

Our verdict

A tidy, purpose-built SMB board connector for compact 50 ohm designs. The right-angle body and snap-on coupling make it convenient where space is tight and connections change often.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Right-angle body saves vertical space
  • Through-hole solder mounting is mechanically secure
  • Gold-plated copper body supports stable contact
  • Snap-on coupling speeds up assembly and testing

Cons

  • Requires soldering and a matching PCB footprint
  • Snap-on coupling is not a threaded, high-pull-strength interface
  • No cable or mating jack is included

Best for

Compact 50 ohm RF boards needing a low-profile, repeatedly mated coaxial port

Not ideal for

High-vibration or high-pull-force cable runs that need a threaded coupling

Specifications

ManufacturerElecBee
OrientationRight Angle
GenderFemale
Mounting TypePCB Mount
Termination StyleSolder Type
Mounting FeatureThrough Hole
PolarityStandard
Body MaterialCopper
Body PlatingGold Plating
Impedance (Ω)50
Shield TerminationNA
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x SMB RF Coax Angled Through Hole Male for PCB Mount

Frequently Asked Questions

What is this connector used for?
It provides a 50 ohm SMB coaxial interface on a PCB. It is soldered into through-holes and mates with a standard-polarity SMB female jack or cable assembly.
Does it require soldering?
Yes. It is a solder-type, through-hole connector, so the pins must be soldered to the board.
What impedance does it have?
It is a 50 ohm connector, matching common RF and wireless signal paths.
Is a cable included?
No. The package includes one SMB right-angle male PCB connector only; a mating cable or jack must be supplied separately.
What temperature range does it handle?
The rated operating range is -65°C to +155°C.
How should I care for it?
Keep the interface clean and dry, avoid pulling on the cable when unmating, and inspect the gold-plated body for damage before reuse.

Overview

The ElecBee SMB RF Coax Angled Through Hole Male is a 50 ohm coaxial connector built for direct mounting on a printed circuit board. It is a male plug with a right-angle orientation, so the mating cable runs parallel to the board rather than straight up. This is useful when vertical clearance is limited or when a cable needs to be routed neatly along the PCB. Termination is by soldering into through-holes, a familiar method for prototype and production boards alike.

The connector uses a snap-on coupling instead of a threaded interface. That makes it quick to connect and disconnect during assembly, testing and field service, while still holding the mated pair securely.

Key Features

  • Right-angle male plug: keeps the cable low and parallel to the PCB.
  • Through-hole solder mounting: strong mechanical anchoring on the board.
  • Snap-on coupling: fast mating and unmating without tools.
  • Gold-plated copper body: supports stable electrical contact and resists environmental exposure.
  • 50 ohm impedance: matches common RF signal chains.
  • Wide temperature range: rated from -65°C to +155°C.

Specifications Explained

Impedance

The 50 ohm impedance is the standard for most RF test, wireless and instrumentation equipment. Using a 50 ohm connector in a 50 ohm signal path helps avoid unnecessary reflections.

Orientation and mounting

The right-angle body and through-hole mounting work together: the connector sits close to the board and the solder joints take the mechanical load. Plan the PCB footprint so the body has clearance from nearby components and the cable can exit without sharp bends.

Body material and plating

A copper body with gold plating gives a conductive, corrosion-resistant surface. Gold plating is especially useful where connectors are mated and unmated repeatedly or exposed to humid conditions.

Coupling

Snap-on coupling is the defining feature of the SMB interface. It saves time in assembly and test, but it is not a threaded connection, so it should not be used where strong pull forces are expected.

Temperature range

The -65°C to +155°C range covers most indoor and sheltered outdoor electronics environments.

Compatibility and Requirements

This is a 50 ohm SMB male connector intended for PCB through-hole soldering. It requires a matching SMB female jack or cable assembly and a board footprint that accepts the through-hole pins. Soldering equipment and basic RF assembly care are needed. No cable is included.

Typical Uses

  • Wireless base stations and cellular mobile systems
  • Routers, Wi-Fi boards and radio boards
  • GPS and commercial vehicle telemetry
  • Medical telemetry and test stands
  • M2M communications, process controls and video systems
  • Instrumentation and aerospace or defense test fixtures

What's in the Box

1 x SMB RF Coax Angled Through Hole Male for PCB Mount.

Quick specs

Manufacturer
ElecBee
Orientation
Right Angle
Gender
Female
Mounting Type
PCB Mount
Termination Style
Solder Type
Mounting Feature
Through Hole
See all specifications