Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by GoldenMorning, this oled display is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name OLED Display Module; display size (inch) 0.66; operating voltage (v) 3.3V. Check that your power source supplies 3.3V before connecting it.

Key Highlights

  • Small and easy to carry or mount
  • Model No. / Name: OLED Display Module
  • Display Size (Inch): 0.66
  • Operating Voltage (V): 3.3V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameOLED Display Module
Display Size (Inch)0.66
Display Resolution (pixel)64 × 48
Operating Voltage (V)3.3V
Driver ICSSD1306
InterfaceIIC(I2C)
Length (mm)30
Width (mm)28
Weight (g)5
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 2 cm

Overview

The GoldenMorning 0.66 Inch OLED Module IIC/I2C for D1 MINI, made by GoldenMorning, is listed in our oled display range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: OLED Display Module (measured diagonally; compare with the space you have before ordering)
  • Display Size (Inch): 0.66 (measured diagonally; compare with the space you have before ordering)
  • Display Resolution (pixel): 64 × 48 (measured diagonally; compare with the space you have before ordering)
  • Operating Voltage (V): 3.3V (match this to your power supply; too high a voltage can damage the part)
  • Driver IC: SSD1306
  • Interface: IIC(I2C) (confirm your cable or board uses the same connector)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 28 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

It is an OLED 0.66 Inch Display Module with IIC/I2C for use with the Wemos D1 Mini IOT Device! Use with your Wemos D1 Mini. To provide a bright crisp user interface for your product. Warning: all I/O are designed to be 3.3V compliant only.

Package Includes:

1 x GoldenMorning 0.66 Inch OLED Module IIC/I2C for D1 MINI

2 x Berg Pins

Quick specs

Model No. / Name
OLED Display Module
Display Size (Inch)
0.66
Display Resolution (pixel)
64 × 48
Operating Voltage (V)
3.3V
Driver IC
SSD1306
Interface
IIC(I2C)
See all specifications